Specifications

Chapter 4: Kiosk and Desktop Station Installation and Setup
4 – 4
Notes
3 Connect the network cable to an RJ-45 network jack,
connected to the network where the B.A.S.I.S.® database
resides.
4 Connect the power cable to the power outlet.
5 Power up all components in the kiosk – encoder, UPS, and
computer.
The screen displays the message, “This kiosk is cur-
rently unavailable.”
You should also hear the kiosk fan running.
Factory-
default
screen
This is the factory-default screen that displays when the kiosk
station is not yet connected to a B.A.S.I.S. database.
6 Power down all components of the kiosk.
7 Close and lock the cabinet door.
Figure 4.2 Loading magnetic stripe cards into the card
hopper
Card hopper
Cards with stripe
facing down
Card weight
Put the stripe
towards the kiosk
cabinet door