User`s guide

INSTALLING THE TRAVELER HARDWARE
25
A TYPICAL TRAVELER SETUP (NO MIXER)
Here is a typical Tr a v e l e r studio setup. This rig can
be operated without an external mixer. All mixing
and processing can be done in the computer with
audio software. During recording, you can use the
Traveler’s Cue M i x ™ DSP no-latency monitoring to
listen to what you are recording via the main outs,
headphone outs, or any other output pair. You can
control monitoring either from the front panel or
from the included CueMix Console software.
S/PDIF
DAT deck
AES/EBU
quarter-inch
analog outs
synthesizer
monitors
Figure 4-7: A typical Traveler studio setup.
headphones
Analog outputs (stage
monitors, surround
monitors, etc.)
MIDI IN
MIDI OUT
PC
Trav el er
back panel
mics
FireWire
Digital reverb or other
outboard gear
ADAT optical
Digital processor or
other outboard gear
guitars (with or
without an amp)
Analog
sends
Analog
returns
Trav el er
front panel
headphone
jack
Compressor, reverb or other
analog outboard gear
!Traveler Manual/Win Page 25 Monday, November 29, 2004 3:50 PM