User`s guide

CUEMIX CONSOLE
77
displayed, CueMix Console will jump to the
appropriate tab to display the control you are
adjusting.
Share surfaces with other applications
When the Share surfaces with other applications
menu command is checked, CueMix Console
releases the control surface when you switch to
another application. This allows you to control
your other software with the control surface. Here’s
a simple way to understand this mode: the control
surface will always control the front-most
application. Just bring the desired application to
the front (make it the active application), and your
control surface will control it. When you’d like to
make changes to CueMix Console from the control
surface, just bring CueMix Console to the front
(make it the active application).
When this menu item is unchecked, your control
surface will affect CueMix Console all the time,
even when CueMix Console is not the front-most
application. In addition, you will not be able to
control other host audio software with the control
surface at any time (because CueMix Console
retains control over it at all times). This mode is
useful when you do not need to use the control
surface with any other software.
Mackie Control Surfaces
CueMix Console includes support for the following
control surface products:
■ Mackie Control™
■ Mackie HUI™
■ Mackie Baby HUI™
Use the sub-menu commands in the Mackie
Control Surfaces menu item to turn on and
configure control surface support, as described
briefly below.
Enabled
Check this menu item to turn on control surface
operation of CueMix Console. Uncheck it to turn
off control surface support.
Configure…
Choose this menu item to configure your control
surface product. Launch the on-line help for
specific, detailed instructions for configuring
CueMix Console for operation with your control
surface product.
Figure 10-6: Refer to the extensive on-line help for details about
configuring CueMix Console for operation with your control surface
product.
!Traveler Manual/Win Page 77 Monday, November 29, 2004 3:50 PM