User`s guide

CUEMIX CONSOLE
78
CUEMIX CONSOLE EXAMPLES
Figure 10-7 below shows some examples of how
you can use CueMix DSP:
■ Powered speakers are connected to the Traveler
main outs. Any input can be routed directly to the
speakers.
■ Microphone input can be routed via CueMix
DSP to the effects processor for live outboard
processing during recording. The resulting signal
can be recorded into the computer either wet, dry
or both (via the effects processor return or the
direct mic input).
■ The ADAT optical connection provides 8
channels of 24-bit digital I/O to the digital mixer
(or 4 channels at 96kHz). Any device connected to
the Traveler can be routed to/from the mixer with
no latency. Conversely, any mixer channel can be
routed to any device connected to the Traveler with
no latency.
Figure 10-7: An example setup of a system that takes full advantage of CueMix DSP.
!Traveler Manual/Win Page 78 Monday, November 29, 2004 3:50 PM