User Manual

- 19 -

6. After the necessary files are copied into your

internal hard disk, a screen will appear as the

figure, click Finish to restart computer.

7. Now the drivers have been updated. After the computer is restart and boot into Windows system,

you can connect the external CD-RW to the computer. Check ‘Device Manager’, the new drivers

should be installed as the table and figure.

Installed Device Drivers Location

Storage Adapter Bridge Module Installed under ‘Universal Serial Bus Controllers’.

The real name of the CD-RW drive

Installed under ‘DVD/CD-ROM drives’ (the name

list in the figure may differ from your CD-RW drive).

The above figure indicates the drivers have been

installed into the system that supports both USB1.1

and USB2.0 function.

The above figure indicates the drivers have been

installed into the system that supports only USB1.1

unction.