Installation manual

10
2. Connect the 36-pin connector to
the Slim drive and connect the
other end to your computer’s
Parallel port.
3. Plug in the AC adapter and power
on your system and the Slim
drive.
4. Continue with the Software Installation.
Software Installation for USB Model
Windows 98/ME
1. Power on your PC and make sure the USB port device driver is
installed and available in Windows 98/ME.
2. Plug the USB cable into the USB port on your PC.
3. If this is the first time you are connecting the Slim drive to the
USB port of your PC, the Add New Hardware Wizard dialog box
will appear as below.
4. Click on Next, check the Search for the best driver for you
device and click Next.