Installation manual

19
Windows NT
Before you begin:
•
Power on your PC
• Make sure that Windows NT is version 3.51 or higher and installed.
•
Since Windows NT does not support the Hot Insert/Remove
feature, the Slim drive should be connected to your PC prior to
starting Windows NT. Likewise, don’t remove the Slim drive before
shutting down Windows NT.
•
In Windows NT, the I/O and IRQ settings of the Slim drive can not
be changed. Therefore, if the setting conflict with other devices
you are using, change the I/O and IRQ settings of the other
devices to avoid conflicts.
Windows NT (con’t.)
1. Pull up the Start menu, select Settings and then Control Panel.
Double-click the SCSI Adapter icon.
2. Click the Drivers tab.
3. Click Add, and then Have Disk.