Installation manual

Windows NT

1. Once you have connected the Parallel cable to your PC and the Slim

drive, power ON your PC.

2. Pull up the Start menu, select Settings, then click Control Panel.

3. Double-click the SCSI Adapter icon.

4. Click the Drivers tab. Make sure IDE CD-ROM ATAPI…is selected

and click Add, as shown below.

5. Once in the Install Driver window, click Have Disk as shown below.

6. Insert the device driver diskette into your floppy drive. Specify the

directory as A:\WINNT or B:\WINNT, whichever contains the

diskette. ClickOK.

7. Click OK.