User Manual

User manual:
1. Charging the battery:
- Connect the battery pack connector to the charger connector
- Connect the charger to a plug outlet.
- In case of abnormal heating(45 degrees Celsius or higher), stop charging immediately.
- To store the battery in good condition, keep the model running until the model stops before
storage.
- This charger is exclusive for the RACING TRUCK battery pack, Do not use it for any other
purpose.
2. Preparing the transmitter for use.
- Turn both the steering and throttle to normal
- Install 8 AA size batteries in the transmitter.
3. Preparing the chassis.
- Installing the antenna Feed the antenna through the antenna pipe, then, install the antenna pipe
on the chassis as shown.
- Installing the battery Open the battery box and put in the battery pack.
- Connect the battery connector to the body connector installing the battery Close the battery
box cover with a pin.
4. Preparing before driving
- Fully extend antenna
- Switch on transmitter
- Switch on the model
- Adjustment of a Throttle Trim
- Adjustment of a Steering Trim