Owner's manual

MIDI control
All of Crossfade Loop Synth’s parameters can be controlled via MIDI CC’s (Continuous
Controllers) according to the table below.
CC 64 (sustain pedal) is also supported.
2 Root Note
3 Fine Tune
4 Start Offset
5 Loop Start
7 Volume
8 Loop End
9 Crossfade
11 Attack
12 Decay
13 Release
14 Attack Shape
15 Decay Shape
16 Release Shape
17 Sustain
18 Filter Cutoff
19 Filter Q
20 Filter Type
21 Filter Env Amount
22 Filter Env Attack
23 Filter Env Decay
24 Filter Env Release
25 Filter Env Attack Shape
26 Filter Env Decay Shape
27 Filter Env Release Shape
28 Filter Env Sustain
29 No Loop Fade
30 No Loop On/Off
31 Loop Mode
32 Saturation On/Off
33 Saturation Amount
34 Saturation Shape
35 Crossfade Type
36 Pitch Wheel Range
37 Play Position Memory
39 Record Mode
40 Record On/Off
41 Record Level
42 Dry Level
43 Feedback
44 Drone 0 On/Off
45 Drone 0 Note
46 Drone 0 Volume
47 Drone 1 On/Off
48 Drone 1 Note
49 Drone 1 Volume
50 Drone 2 On/Off
51 Drone 2 Note
52 Drone 2 Volume
53 Filter LFO Shape
54 Filter LFO Speed
55 Filter LFO Amount
56 Filter LFO Invert
57 Filter LFO Delay
58 Filter LFO Retrigger
59 Filter LFO Mono
60 Pitch LFO Shape
61 Pitch LFO Speed
62 Pitch LFO Amount
63 Pitch LFO Invert
65 Pitch LFO Delay
66 Pitch LFO Retrigger
67 Pitch LFO Mono
68 Calibration Note
69 Buffer Size
70 Use Beats
71 Beats
72 Beat Divisor
73 Triplet
74 Pulse Width
75 Pulse Width LFO Shape
76 Pulse Width LFO Speed
77 Pulse Width LFO Amount
78 Pulse Width LFO Invert
79 Pulse Width LFO Delay
80 Pulse Width LFO Retrigger
81 Pulse Width LFO Mono
82 Reference Tone Level
83 Hard Sync Cycles
84 Hard Sync Detune
85 Sync Detune LFO Shape
86 Sync Detune LFO Speed
87 Sync Detune LFO Amount
88 Sync Detune LFO Invert
89 Sync Detune LFO Delay
90 Sync Detune LFO Retrigger
91 OSC Port Offset