Manual

Delay Time
The Delay Time section controls the length of the delay.
Delay
Sets the length of the delay within the limits set with the Size con-
trol. The value simply goes from 0.0 to 1.0. Refer to the read-out
at the bottom of the section for the actual delay time in millisec-
onds.
Spread
Sets the difference in delay times between the channels (i.e. left
and right for stereo operation). At 0.0, the two channels have the
same delay time.
Size
Sets the maximum length of the delay - the length of the ‘bucket
brigade’ in hardware terms.
The actual maximum delay time will depend on this setting and on your audio clock rate.
E.g. at 88.2kHz the delays will be exactly half as long as at 44.1kHz. The range of delay
times at 44.1kHz is as follows:
Size setting
Minimum delay time
Maximum delay time
Tiny
5.8ms
116.1ms
Small
11.6ms
232.2ms
Comfortable
23.2ms
464.3ms
Large
46.4ms
928.8ms
Very Large
92.9ms
1857.6ms
Huge
185.8ms
3715.2ms