Instruction Manual

Quickstart
For a quick overview of Little Spacey, load up the plug-in in your host application of
choice and try out the factory presets, which are listed below.
In some cases you will probably need to set up your levels appropriately, as described be-
low in the Envelope Modulation section, so that the envelope tracking works optimally.
Factory presets
Defaults
In this preset all parameters are at their default value, giving a single fairly short delay.
This is a plain ‘vanilla’ preset from which to start creating your own sounds.
With Feedback
Adds some feedback to the default settings for a repeating echo.
Subtle Shimmer
Adds some modulation, with spread, for a rich ‘chorus-y’ sound.
Vibrato
A deeper modulation, with a very short (almost inaudible) delay, turns the effect into more
of a vibrato than a delay per se.
Oil Drum
A tiny delay with high feedback gives what sounds a little like a reverb, but in a highly
coloured environment.
Stereo Delay
The spread on the delay time is turned up to give quite different delay times on the left
and right channels.
Two LFOs
LFO 2 applies a modulation to the LFO 1 modulation depth. LFO 2 Spread is set to 0.5 so
left and right channels are out phase.
Ducky
Maximum ducking is applied. With an appropriate input level you should hear that the
delays are inaudible when the incoming sound is loud, only appearing when the level tails