SDS

Page: 6/11
Safety Data Sheet
acc. to OSHA HCS (29 CFR 1910.1200) and WHMIS 2015 regulations
Printing date: 11/04/2016 Revision: 11/04/2016
Trade name:
ExperTexture Wall
(Cont'd. of page 5)
43.0
·
Odor:
Ether-like
·
Odor threshold:
Not determined.
·
pH-value:
8.8
·
Melting point/Melting range:
Not applicable, as aerosol.
·
Boiling point/Boiling range:
-28 °C (-18 °F)
·
Flash point:
-43.5 °C (-46 °F) (Closed Cup)
·
Flammability (solid, gaseous):
Not applicable.
·
Auto-ignition temperature:
350 °C (662 °F)
·
Decomposition temperature:
Not determined.
·
Danger of explosion:
Product is not explosive. However, formation of explosive air/
vapor mixtures are possible.
·
Explosion limits
Lower:
Not determined.
Upper:
Not determined.
·
Oxidizing properties:
Non-oxidizing.
·
Vapor pressure:
100 kPa
·
Density:
Relative density:
1.34
Vapor density:
Not determined.
Evaporation rate:
Not applicable.
·
Solubility in / Miscibility with
Water:
Not miscible or difficult to mix.
·
Partition coefficient (n-octanol/water):
Not determined.
·
Viscosity
Dynamic:
800 cPs
Kinematic:
Not determined.
VOC content:
98 g/L
·
Other information
No relevant information available.
10 Stability and reactivity
·
Reactivity:
No relevant information available.
·
Chemical stability:
Stable under normal temperatures and pressures.
·
Thermal decomposition / conditions to be avoided:
Danger of receptacles bursting because of high vapor pressure if heated.
·
Possibility of hazardous reactions
Develops readily flammable gases / fumes.
Reacts with oxidizing agents.
Can form explosive mixtures in air if heated above flash point and/or when sprayed or atomized.
(Cont'd. on page 7)