User's Manual
14
FIRMWARE UPDATE
The console supports OTA rmware update capability. Its rmware may be updated over
the air anytime (whenever necessary) through any web-browser on a PC / Mac with WI-FI
connectivity. Update function, however, is not available through mobile/smart devices.
Two types of rmware updates are available, namely Function Firmware and System WI-FI
Firmware, and are located at the bottom of ADVANCED page.
Current Function
firmware version
Current WI-FI
firmware version
FIRMWARE UPDATE STEP
1. Download the latest version rmware (function or WI-FI) to your PC / Mac.
2. Set the Console into AP (access point) mode then connect the PC / Mac to the console (ref to
"SETUP WI-FI CONNECTION" section in previous page).
3. To update the Function rmware, click the
Browse
in Function rmware section and
browse to the location of the le you download in step 1. To update the WI-FI rmware, click
the
Browse
in WI-FI rmware section.
4. Click the corresponding
Upload
to start
transfer the rmware le to console (indicated by
a transfer completion %).
Upload
30% ...
BrowseC:\download\PWS_SYS.bin
Upload
Browse
Function firmware version: 1.00
WiFi firmware version: 1.00
3
4
5. Once the console received the rmware le, it
executes the update automatically as indicated
by the update progress on display (i.e. 100 is
completion).
6. The console will restart once the update completed.
NOTE:
- Function and WI-FI rmware cannot be updated at the same time, you need to update one by
one.
- Please keep connecting the power during the rmware update process.
- Please make sure your PC / Mac's WI-FI connection is stable.