User's Manual

5. Total - the total rainfall since the last reset

6. Rate - Current rainfall rate in past an hour (Update every 24 seconds)

TO RESET THE TOTAL RAINFALL RECORD

In normal mode, press and hold [ HISTORY ] key for 2 seconds to reset all the rainfall record.

NOTE:

To ensure correct data, please reset all the rainfall record when you reinstall your wireless 5-IN-

1 sensor to other location

MAX / MIN DATA RECORD

The console can record the accumulated MAX / MIN weather data with the corresponding time

stamp for you to easy review.

TO VIEW THE ACCUMULATED MAX / MIN

In normal mode, press [ MAX / MIN ] key to check MAX/MIN records. The display sequence is:

indoor (or current channel) MAX temperature indoor (or current channel) MIN temperature

indoor (or current channel) MAX humidity indoor (or current channel) MIN humidity

outdoor MAX temperature outdoor MIN temperature outdoor MAX humidity outdoor

MIN humidity MAX average wind speed MAX gust MAX relative pressure MIN

relative pressure MAX absolute pressure MIN absolute pressure MAX FEELS LIKE

MIN FEELS LIKE MAX heat index MIN heat index MAX wind chill MIN wind

chill MAX dew point MIN dew point MAX daily rainfall.

TO CLEAR THE MAX/MIN RECORDS

Press and hold [ MAX / MIN ] key for 2 seconds to reset the MAX / MIN records of specify

weather display section.

NOTE:

The LCD will also display the " " icon, data records time & date.

PAST 24 HOURS HISTORY DATA

The console automatically stores the weather data of the past 24 hours.

1. Press [ HISTORY ] key to check the beginning of the current hour's weather data, e.g. the

current time is 7:25 am, March 8, the display will show the data of 7:00am, March 8.

2. Press [ HISTORY ] key repeatedly to view older readings of the past 24 hours, e.g. 6:00am

(Mar 8), 5:00am (Mar 8), …, 10:00am (Mar 7), 9:00am (Mar 7), 8:00am (Mar 7)

NOTE:

The LCD will also display the " " icon, history data records with time & date.

WEATHER ALERT SETTING

Weather Alert can alert you of certain weather conditions. Once the alert criterion is met, the

alarm sound will activate and the LCD’s alert icon will ash.

TO SET ALERT

1. Press [ ALERT ] to select and display the desired weather alert reading in the sequence

below:

Alert reading Sequence Setting Range Display Section Default Value