Product Specs

ManualsBrandsEXPRESS LUCK INDUSTRIAL ManualsElectronicsIEEE 802.11b/g/n/a/ac 2T2R USB Wifi module Integrated BT 2.1+EDR/4.2/5.1

PAGE 1 OF 5

Version 1.0

WIFI Module

IEEE 802.11b/g/n/a/ac 2T2R USB Wifi module Integrated BT

2.1+EDR/4.2/5.1

Model Number: EL.MT7663BUN-WF

Product Descrition

EL.MT7663BUN-WF module is based on MediaTek MT7663BUN solution.

MT7663BUN is highly integrated single chip which features a low power 2x2

11a/b/g/n/ac dual-band

Wi-Fi subsystem and a Bluetooth subsystem. The Wi-Fi subsystem contains the

802.11a/b/g/n/ac radio, baseband, and MAC that are designed to meet both the low

power and high throughput application. MT7663BUN has a 32-bit RISC MCU that

handles Wi-Fi and Bluetooth tasks. The Bluetooth subsystemcontains the Bluetooth

radio, baseband, link controller. It also uses the 32-bit RISC MCU for the Bluetooth

protocols.This documentation describes the engineering requirements specification.

Product Features

Product Specification

Model

EL.MT7663BUN-WF

Product Name

IEEE 802.11b/g/n/a/ac 2T2R USB Wifi module Integrated BT 2.1+EDR/4.2/5.1

Standard

IEEE

802.11a/b/g/n/ac

BT 2.1+EDR/4.2/5.1

Data Transfer Rate

1,2,5.5,6,11,12,18,22,24,30,36,48,54,60,90,120 and maximum of 866.7Mbps

Modulation Method

GFSK,π/4-DQPSK,8DPSK(bluetooth)

DQPSK,DBPSK,CCK(802.11b)

QPSK,BPSK,16QAM,64QAM with OFDM (802.11g)

QPSK,BPSK,16QAM,64QAM with OFDM (802.11n)

QPSK,BPSK,16QAM,64QAM with OFDM (802.11a)

QPSK,BPSK,16QAM,64QAM,256QAM with OFDM (802.11ac)

Frequency Band

BLUETOOTH :2402~2480 MHz

2.4G: 2412~2462 MHz

5G: 5150~5350MHz,5470~5725MHz

5725~5850MHz

Operation Mode

Infrastructure

Security

WEP, TKIP, AES, WPA, WPA2

Operating Voltage

3.3V±10%

Current Consumption

＜1000mA

Antenna Type

PCB

Operating

Temperature

0 ~ 70°C ambient temperature

Storage Temperature

-40 ~ 80°C ambient temperature

Humidity

5 to 95 % maximum (non-condensing)

NOTICE:

◆ Complies with IEEE 802.11b/g/n for 2.4GHz and IEEE 802.11a/n 5GHz Wireless LAN.

◆ Two transmit and Two receive path(2T2R)

◆ Works with all existing network nfrastructure.

◆ Capable of up to 128-Bit WEP Encryption.

◆ Freedom to roam while staying connected.

◆ UP to 300 Mbps High-Speed Transfer Rate in 802.11n mode of operation.

◆ Operating Systems：Linux,Win7, Win8, Win10,XP

◆ Low power consumption.

◆ Easy to install and configure.

◆ High speed USB 2.0 interface

◆ROHS compliant

Summary of content (5 pages)

PAGE 1
WIFI Module IEEE 802.11b/g/n/a/ac 2T2R USB Wifi module Integrated BT 2.1+EDR/4.2/5.1 Model Number: EL.MT7663BUN-WF Product Descrition EL.MT7663BUN-WF module is based on MediaTek MT7663BUN solution. MT7663BUN is highly integrated single chip which features a low power 2x2 11a/b/g/n/ac dual-band Wi-Fi subsystem and a Bluetooth subsystem. The Wi-Fi subsystem contains the 802.11a/b/g/n/ac radio, baseband, and MAC that are designed to meet both the low power and high throughput application.
PAGE 2
◆please keep this product and accessories attached to the places which children can't touch; ◆do not splash water or other liquid onto this product, otherwise it may cause damage; ◆do not put this product near the heat source or direct sunlight, otherwise it may cause deformation or malfunction; ◆please keep this product away from flammable or naked flame; ◆please do not repair this product by yourself. Only qualified personnel can be repaired.
PAGE 3
requirements. The module complies with FCC Part 15.247 / Part 15.407 and apply for Single module approval. Trace antenna designs: Not applicable. This radio transmitter 2AWY6-ELMT7663BUN has been approved by Federal Communications Commission to operate with the antenna types listed below, with the maximum permissible gain indicated. Antenna types not included in this list that have a gain greater than the maximum gain indicated for any type listed are strictly prohibited for use with this device.
PAGE 4
compliance. Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la section 2.5 de RSS 102 etla conformité à l'exposition de RSS-102 RF, utilisateurs peut obtenir l'information canadienne surl'exposition et la conformité de rf. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.
PAGE 5
extends to the host manufacturer’s instruction manual. This module is stand-alone modular. If the end product will involve the Multiple simultaneously transmitting condition or different operational conditions for a stand-alone modular transmitter in a host, host manufacturer have to consult with module manufacturer for the installation method in end system. Any company of the host device which install this modular should perform the test of radiated & condicted emission and spurious emission etc.