Installation Manual

RO Ultraviolet

Overall System Connections

Connection Points

A to B Connect the RED Tubing to the Feed Water

Adapter Valve (point A), then to the hole marked as

“IN” on the Leak Stop Valve (point B).

C to D Connect the WHITE Tubing to the hole

marked as “OUT” on the Leak Stop Valve (point C),

then to the Sediment Filter Housing’s Male Elbow

Fitting (point D).

E to F Connect the BLACK Tubing to the Flow

Restrictor side indicated by the arrow on the Restrictor

(point E), then to the Drain Saddle (point F).

G to H Connect the YELLOW Tubing to the Inline

Post Carbon Filter’s Stem Run Tee (point G), then to

the Water Storage Tank’s Tank Valve (point H).

I to J Connect the BLUE Tubing to the Stem Elbow at

the end of the Inline Post Carbon Filter (point I), then

to your RO Faucet connection (point J).

Your drinking water is going to be healthier and taste better from now on, and nothing

makes us happier. Getting started is a breeze— most of your Reverse Osmosis System is

already assembled and every connection is color coded. We’ve marked where the colored

tubes will go with matching colored plugs in each tting.

We know life isn’t always so simple though. If you have questions during your setup we

can help. Just give us a call during normal business hours at: 1-800-992-8876

For Installation Videos go to: