Installation Manual
8 9
Inallation Notes
Tools Required
Before you begin please make sure you have all of the following tools ready to use:
- Box Cutter
- Phillips-Head Screwdriver
- Power Drill
- 1/4” Drill Bit (for Drain Saddle Valve)
- 1/2” Drill Bit (for RO Faucet)
- Adjuable Wrench
Components Li
Your new Reverse Osmosis Water Syem should include the following items.
If any item is missing please contact Express Water.
Please take a few moments to check all the following components:
Accessories and Connections
5 ft Yellow 2 ft White
5 ft Red 5 ft Blue 5 ft Black
Color Coded Tube 1/4” OD Drain Saddle Package
Foam Gasket2 Drain Clamp Halves
2 Nuts
2 Bolts
Connections
Faucet
Adapter
Male
Elbow
Male Elbow
with Red Plug
2
Screws
Locking Clip
Bag
Tank
Valve
Feed Water Adapter Valve Teon Tape Filter Housing Wrench
Leak Stop Valve Components
Leak Stop Valve
3 Replacement Pads
2 Mounting Screws
Screws
Pads
Leak Stop Valve
RO Storage Tank
Water Storage Tank
Tank Stand
NOTE!
In the package you will nd the Tank Stand
screwed to the top of the tank. Unscrew it
and place it underneath for a eady position.
Storage Tank
Tank Stand
Thread
Air Valve
RO Faucet Kit Components
1
4
7
2
5
8
3
6
9
Faucet Design and
Accesories May Vary
1. Rubber Washer (Large)
2. Base Plate
3. Plaic Washer
4. Rubber Washer (Small)
5. Lock Washer
6. Hex Nut
7. Compression Nut
8. Insert
9. Sleeve