Instructions / Assembly
13
Inallation
1. Identify if your faucet is compatible with the 13/16”
female threaded diverter valve
- If it is not compatible you may need the 13/16”
male to 13/16” male adapter -or the- 15/16” male to 13/16”
male adapter
- If your faucet is not compatible with either of these
adapters you will need to purchase an appropriate adapter
to connect your faucet to the diverter valve
1. Push the RO Faucet stem into the Faucet Adapter on the
Post Activated Carbon Filter
2. Make sure the faucet is fully pushed in
CAUTION!
The water supply to the unit MUST be COLD WATER ONLY. Using HOT WATER will severely damage
your RO System.
2. Screw on Diverter Valve
(with appropriate adapters
if needed)
3. Remove the black
plug from the Union
Connection and insert the
Black Tubing
4. Remove the blue
plug from the Sediment
Filter and insert the
White Tubing
5. Check to make sure
tubes are fully inserted
15/16” to 13/16”13/16” to 13/16”
Diverter Valve
RO Faucet