Instructions / Assembly
8
Introduction
Fir, get ready to have safe clean water. You’re going to need under 30 minutes for the initial inallation
and two hours to run the syem and ush out your lters before you can drink the water.
Take a Look at Your Syem
Fir inspect your syem and make sure all parts are present and have not been damaged during shipping.
We’ve taken every ep to make this process as easy as possible but if you discover any problems or run in
to queions during your inallation ju give us a call:
1-800-992-8876 Monday to Friday 10 am - 5 pm PST
Take a Look at Your Faucet
If you have a andard kitchen or bathroom faucet you can get up and running right away, ju remove
your aerator and screw the diverter valve on. We support 13/16” male threaded faucets, 13/16” female
threaded faucets, and 15/16” female threaded faucets. If you have another type of faucet you will need to
visit a home or plumbing supply ore to adapt from your faucet type to 13/16” male (as the diverter valve
is 13/16” female).
Get Ready for Pure Water
The ow through your faucet makes perfectly pure RO water at a rate of about 3 gallons an hour (this may
be less depending on your home’s water pressure) so we’ve found the ideal setup is lling a large pitcher
or dispenser with water.