Use and Care Manual

1. Now disconnect the Stem Elbow and Stem Tee from the sides of the Inline Carbon Filter.
2.
Note the orientation of the PAC old filter, install the new filter in the same orientation. Remove the
old filter from the holding clips and discard. Next, insert the new filter into the holding clips and
connect the Stem Elbow and Stem Tee to the new Inline Carbon Filter.
1. Open the RO Membrane Housing by unscrewing the cap. Pull out the RO Membrane with a pair of
pliers. Be sure to note which side is the front and which side is the back of the membrane.
2. Wash out the RO Membrane Housing. Install the new RO Membrane in the Housing in the correct
direction you noted earlier. Make sure to push the Membrane in firmly, then close the Housing by
tightening the cap.
RO Membrane Change
(Recommended change 1 year)
UV Housing
UV Change
(Recommended change 6-12 months)
PAC Change
(Recommended change 1 year)