Installation Guide

Sy󰎣em Connections

You may have already completed some or all of these connections in previous 󰍰eps. Make sure to remove

any plugs before in󰍰alling Tubing. Use the provided Locking Clips to secure any Tubing connections.

A to B Connect the RED Tubing to the Feed Water Adapter Valve (point A), then to the hole marked “IN” on

the Leak Stop Valve (point B).

C to D Connect the WHITE Tubing to the hole marked “OUT” on the Leak Stop Valve (point C), then to the

Sediment Filter Housing’s Male Elbow Fitting (point D).

E to F The RED Tubing is already connected to the Automatic Shut-O Valve (point E), connect the loose end

to the Carbon Block Filter Housing’s Male Elbow Fitting (point F).

G to H Connect the BLACK Tubing to the Flow Re󰍰rictor side indicated by the arrow on the Re󰍰rictor (point

G), then to the Drain Saddle (point H).

I to J Connect the YELLOW Tubing to the PAC Filter’s Stem Run Tee (point I), then to the Water

Storage Tank’s Tank Valve (point J).

K to L Connect the BLUE Tubing to the Stem Elbow at the end of the PAC Filter (point K), then to your RO

Faucet connection (point L).

OUT