Installation Guide

12
Fir󰎤, turn o water supply to the sy󰎤em.
Open the neare󰍰 faucet until ow 󰍰ops to depressurize your plumbing.
Shut o the faucet once ow 󰍰ops.
Prepare for water discharge then press the red pressure release button.
Press the red pressure release button.
Prepare for the sy󰍰em to discharge water when you remove the
housing. Use your Filter Housing Wrench to unscrew the lter
housings from your sy󰍰em.
Each lter is good for approximately 6 months or up to 100,000 gallons of
water. The amount of time and water depends on the quality, temperature,
and pressure of your water supply. Your replacement cycle may be
longer or shorter because of this.
If you notice a drop in your water pressure in your home or on the pressure
gauges, this usually indicates you are ready for a lter replacement. Once
your pressure has dropped 10-12 PSI from your initial pressure we sugge󰍰
replacing your lters.
Filter Change
Tools Needed:
- Filter Housing Wrench
- Gasket Lubricant
- Replacement Filters
- Towels
Pressure Release
Button
Turn O Water
Supply