Installation Guide

Sy󰎣em Usage Conditions:
Feed Water Pressure: 20-80 PSI
Feed Water Temperature: 40-100
O
F
We recommend using a professional licensed plumber for the Whole House Filtration Sy󰍰em In󰍰allation.
If your feed water is prone to spikes in pressure or is over 80 PSI you will need a pressure protection or
reducer valve in󰍰alled before the feed water ows to the sy󰍰em. Always use appropriate safety measures
and methods for the in󰍰allation.
Your in󰍰allation mu󰍰 comply with all of your 󰍰ate and local codes. The in󰍰allation area needs to be level
and dry. The sy󰍰em mu󰍰 be in󰍰alled in a sheltered environment with no exposure to extreme hot or cold
weather, out of direct sunlight. Never expose the sy󰍰em to freezing temperatures. The sy󰍰em cannot be
in󰍰alled upside down.
Express Water assumes no liability for the determination of the proper equipment necessary for your home.
This sy󰍰em does not remove biological contaminants. We recommended a UV light if your water is
biologically unsound.
Visit our website: www.ExpressWater.com or call us at 1-800-992-8876 to explore UV ltration options.
Copyright © 2019 by Express Water Inc.
All rights reserved. No part of this publication may be reproduced, di󰍰ributed, or transmitted in any form or by any
means, including photocopying, recording, or other electronic or mechanical methods, without the prior written
permission of the publisher, except in the case of brief quotations embodied in critical reviews and certain other
noncommercial uses permitted by copyright law.
Conditions