User Manual

6 5
1
ANSCHLÜSSE
AUFBAU
CONNECTORS
Anleitung
Vers. 1.0 / 27.07.16
EX-1133-N
HARDWARE INSTALLATION
USB 3.1 (Gen1)
C-Stecker zum Anschluss an PC
RJ45 Anschluss
USB 3.1 (Gen1)
A-Buchse
Der EX-1133-N ist mit einem USB 3.1 (Gen1) C-Stecker zum Anschluss an den PC ausgestat-
tet. Die EX-1133-N ermöglicht Ihnen auf einfachste Weise Ihren Desktop PC oder Ihr Notebook
in ein 10/100/1000Mbps Netzwerk einzubinden oder ein Endgerät anzuschließen. Gleichzeitig
verfügt er über einen USB 3.1 (Gen1) HUB mit drei Ports. Die EX-1133-N gewährleistet eine
sichere Datenübertragung und exzellente Performance von bis zu 5Gbit pro Sekunde auf der
USB Schnittstelle! Der RJ45 Anschluss wird durch einen Realtek Chipset unterstützt. Er unter-
stützt den Bus Powered Modus.
Kompatibilität: USB 3.1 (Gen1) C-Anschluss / TCP/IP 10/100/1000
Betriebssysteme: Windows XP / 7/ 8.x/ 10/ Server 2012R2, Linux, MAC OS
Anschlüsse: 1x USB 3.1 (Gen1) C-Stecker, 1x RJ45 Gigabit Ethernet,
3 x USB 3.1 (Gen1)
Lieferumfang: EX-1133-N, Anleitung
Zertifikate: CE / FCC / RoHS / WEEE DE97424562
Attention!
Never plug in with force or
in wrong direction.
USB 3.0 A-female:
USB 3.1 (Gen1) C-male:
A12 A11 A10 A9 A8 A7 A6 A5 A4 A3 A2 A1
GND RX2+ RX2- VBUS SBU1 D- D+ CC1 VBUS TX1- TX1+ GND
GND TX2+ TX2- VBUS CC2 D+ D- SBU2 VBUS RX1- RX1+ GND
B1 B2 B3 B4 B5 B6 B7 B8 B9 B10 B11 B12
Because there are large differences between PC’s, we can give you only a general installation
guide for the EX-1133-N. Please refer your computer’s reference manual whenever in doubt.
1. Connect the EX-1133-N to the C-female connector at your PC.
2. Now you can connect a network cable at the EX-1133-N and as USB 3.1 (Gen1) devices to
the three A-female connector.
Attention:
For a stable connection, don't use this hub with high power-consumption devices, such as
external hard drives.
Some USB 3.0 devices require a direct connection to host USB 3.0 ports, including some USB
3.0 hard disks like Seagate, Apple Super Drive, etc,
.
Does not work with 2.4GHz wireless devices such as wireless keyboard and mouse adapters.
Try using the host port or a USB 2.0 connection.
Windows XP/ 7/ 8.x/ 10/ Windows Server 2003 & 2008R2 & 2012
After the hardware installation, the operating system will recognize the device automatically and
install the drivers.
CHECK INSTALLED DRIVER
Open the >Device manager<. Now you should see at „Ethernet Adapter“ the following new
entry:
also the USB 3.1 (Gen1) port:
If you see this or a similar information the device is installed correctly.
For cleaning please use only a dry fluff less cloth and remove the dirt with gently pressure. In
the area of the connectors please make sure that no fibres from the cloth remain in the connect-
ors. Attention! Never use a moist or wet cloth for cleaning!
CLEANING
DRIVER INSTALLATION
BESCHREIBUNG & TECHNISCHE DATEN
RJ45 Port:
RJ45 Port
Pin Signal Pin Signal Pin Signal
1 BI_DA+ 4 BI_DC+ 7 BI_DD+
2 BI_DA- 5 BI_DC- 8 BI_DD-
3 BI_DB+ 6 BI_DB-