Datasheet

Seite 1 www.exsys.de | www.exsys.ch
USB 3.0 zu Ethernet 1Gigabit LAN
mit 4KV Optical Isolation
USB 3.0 zu Ethernet 1Gigabit LAN
mit 4KV Optical Isolation
Mit der EX-1321-4K können Sie Notebook, Desktop Rechner oder Server im 19-Zoll Rack über
den USB 3.0/3.1 (Gen1) oder 2.0 Ausgang in ein 10/100 oder 1000Mbps Netzwerk einbinden.
Die EX-1321-4K unterstützt 4KV Optische Isolation für den Netzwerk Anschluss. Die EX-1321-
4K kann gleichzeitig zu einer bestehender Netzwerkkarte installiert werden. Die Installation ist
sehr einfach ohne das die Systeme geöffnet werden müssen. Mit der EX-1321-4K wir ein Din-
Rail Kit mitgeliefert, für die Installation in ein 19-Zoll Rack.
• Unterstützt 4KV Optische Isolation
• Konform mit Universal Serial BUS 3.1 (Gen1)
• Kompatibel mit USB 2.0 und USB 1.1 Standard
• Unterstützt Full Duplex Betrieb mit IEEE 802.3x Flow Control und Half Duplex Betrieb mit
Retour Belastung Flow Control
• Kompatibel mit IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
• Unterstützt IEEE 802.3az (Energy Efficient Ethernet)
• Unterstützt Crossover Erkennung und Auto-Correction
• Stromversorgung vom USB-Bus (Bus-Power)
• Unterstützt „Wake-on-LAN“
• Verschraubbares USB 3.0 Kabel für eine sichere Installation
• Plastik Gehäuse mit Wand– sowie Din-Rail Kit für Industrielle Anwendung
• LED Anzeige für Power und Ethernet Verbindung
• Chip-Set: Realtek RTL8153B
• Datentransfer-Rate: USB 3.0: bis 5Gbps
Netzwerk: 10/100/1000MBit/Sek.
• Anschlüsse: 1 x USB 3.0 B-Buchse verschraubbar
1 x RJ-45
• Hardwaresysteme: USB 2.0 und 3.0/3.1 (Gen1)
• Treiber: Windows XP/Vista/7/8/8.1/10 (32/64-Bit),
Windows Embedded Compact 7 (CE 7.0/6.0/5.0)
Linux 2.6.x oder höher, MAC OS 10.x
• Betriebstemperatur : 0°C bis 55°C Celsius
• Lagertemperatur: -40°C bis 75°C Celsius
• Rel. Luftfeuchtigkeit: 5% bis 95%
• Abmessung: 65.00 x 42.50 x 20.50 mm
• Gewicht: 200g
• Lieferumfang: EX-1321-4K, USB 3.0 Kabel verschraubbar, Din-Rail Kit,
Wandbefestigung, Handbuch
With the EX-1321-4K you can connect your notebook, desktop computer or in a 19-inch rack via
the USB 3.0/3.1 (Gen1) or 2.0 port to a 10/100or 1000Mbps network. The EX-1321-4K support
4KV Optical Isolation for the Netware port. The EX-1321-4K can installed in the same time with an
existing network card. The installation is very easy and it is not necessary to open the system.
With the EX-1321-4K we delivery a Din-Rail kit for install in a 19-inch rack.
• Support 4KV Optical Isolation
• Compliant with Universal Serial Bus 3.1 (Gen1)
• Compatible with USB 2.0 and USB 1.1 standard
• Supports full duplex operation with IEEE 802.3x flow control and half duplex operation with
back-pressure flow control
• Compatible with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
• Supports IEEE 802.3az (Energy Efficient Ethernet)
• Supports crossover detection and auto-correction
• Power from the USB port (Bus-Power)
• Supports Wake-on-LAN
• Supports USB 3.0 screw lock cable mechanism
• Metal case with wall and Din-Rail mounting kit for industrial application
• LEDs indicate the status of Power status and Ethernet connection
• Chip-Set: Realtek RTL8153B
• Data transfer rate: USB 3.0: up to 5Gbps
Network: 10/100/1000MBit/Sec.
• Connectors: 1 x USB B-female screw lock connector
1 x RJ-45
• Hardware system: USB 2.0 and 3.0/3.1 (Gen1)
• Driver: Windows XP/Vista/7/8/8.1/10 (32/64-Bit),
Windows Embedded Compact 7 (CE 7.0/6.0/5.0)
Linux 2.6.x oder höher, MAC OS 10.x
• Operating Temperature : 32°F up to 131° Fahrenheit
• Storage Temperature: -40°F up to 167° Fahrenheit
• Rel. Humidity: 5% to 95%
• Size: 65.00 x 42.50 x 20.50 mm
• Weight: 200g
• Packaging contents: EX-1321-4K, USB 3.0 cable screw lock, Din-Rail Kit,
Wall mounting kit, Manual
Anwendung / Application
Bild / Picture
EX-1321-4K
USB 3.0/3.1 Gen1
Description Beschreibung
Features Merkmale
Specification Spezifikation
Geprüft / Approved System / OS Verpackung / Packaging
Netzwerk /
Netware
Internet / DSL
Computer
System
Notebook
EX-1321-4K
19-inch Rack
4000Vms Optical Isolation