Datasheet
USB 1.1
EX
-
1335HMV
USB zu 1S Seriell RS
-
422/485 Port,
Surge Protection & Isolation
Beschreibung :
Das EX
-
1335HMV USB 1.1 zu Seriell RS
-
422/485 Gehäuse stellt einen Seriellen RS
-
422/485 High Performance UART 16C550 Port mit
9 Pin oder Terminal Block Anschluss mit 15KV Surge Protection und 2.5KV Optical Isolation zur Verfügung. Es ist entwickelt wo
rde
n um
in einem robustem Metallgehäuse einen weiteren Seriellen RS
-
422/485 Ausgang in einem kompakten Gehäuse für PC, kleine Worksta-
tion oder Server über den USB 1.1 oder 2.0 Bus zu erweitern. Durch die einfache Installation, muss der Rechner nicht geöffnet
we
rden
und der Artikel EX
-
1335HMV kann bei laufendem Betrieb installiert werden.
Das mitgeliefertem Kabel EX
-
K1552 (2 Meter) A
-
Stecker auf B
-
Stecker kann ohne Schraubenzieher an der EX
-
1335H
M
mit Rändelschrauben befestigt werde
n.
Das Kabel kann sich somit nicht mehr von
alleine lösen.
Optional kann mit dem Artikel EX
-
6099 (DIN
-
Rail
-
Kit) die EX
-1335HMV auf eine Trägerschiene in einem 19 Rack installiert werden.
Merkmale :
Schnittstelle:
RS
-
422/485 mit
15KV ESD Surge Protection und 2.5KV Optical Isolation
FIFO Buffer: 16C550 mit 16Byte
I/O Adressen: wird vom Betriebs System vergeben
Interrupt: wird vom System BIOS vergeben mit Interrupt Sharing
Daten Bits: 7, 8 / Stop Bits: 1, 1.5, 2 / Parity: none, even, odd
Signale:
Zwei Einstellungen sind möglich
4-
Draht RS
-
422 (TXD+/
-
, RXD+/
-
), Fullduplex
2-
Draht RS
-
485 (Data+/
-
, Data +/
-
), Halfduplex
Stromversorgung: vom USB Bus (Bus Power)
Chip
-
Set :
FTDI
Datentransfer
-
Rate :
300 Baud bis 921.6KBaud
Anschlüsse :
1 x B
-
Buchse Upstream verschraubbar,
1 x Terminal Block, 1 x 9 Pin Seriell RS
-
/422/485 Stecker
Hardwaresysteme :
USB 1.1 oder 2.0
Abmessung / Gewicht :
92.8 x 40 x 23.1 mm / 400g
Lieferumfang :
EX
-
1335HMV, 1 x USB Kabel A
-
Stecker auf B
-
Stecker 2 Meter (EX
-
K1552), Treiber
-
CD, Handbuch
Arbeitstemperatur :
Luftfeuchtigkeit :
0 bis 55
0
C
5 bis 95%
USB to 1S Serial RS
-
422/485 port, Surge Protection & Isolation
Description:
The EX
-
1335HMV USB 1.1 to Serial RS
-
422/485 box provides one high performance 16C550
-
type UART compatible RS
-
422/485 serial
port with 9
-
pin or Terminal Block connector with 15KV Surge Protection and 2.5KV Optical Isolation. It is designed for PC, thin
client or
server to provide instant COM port expansion in a robust metal box through the USB 1.1 or 2.0 Bus. With the easy installation
yo
u don t
need to open the computer system and install the EX
-
1335HMV when the system run. With the USB cable EX
-
K1552 (2 meter) A
-
male
to B
-male you can fix the connector with screw. The cable can t be disconnect any more by him self. Optional you can install the
EX
-
1335HMV with the product EX
-
6099 (DIN
-
Rail
-
Kit) in a 19 inch Rack.
Feature :
Interface: RS
-
422/485 with
15KV ESD Surge Protection and 2.5KV Optical Isolation
FIFO Buffer: 16C550 with 16Byte
I/O addresses: Setting from the operating system
Interrupt: Setting from the System BIOS with Interrupt Sharing
Data Bits: 7, 8 / Stop Bits: 1, 1.5, 2 / Parity: None, even, odd
Signal:
Two modes are selectable:
4-
Wire RS
-
422 (TXD+/
-
, RxD+/
-
) Fullduplex
2-
Wire RS
-
485 (Data+/
-
, Data+/
-
) Halfduplex
Power from the USB Bus (Bus Power)
Connectors :
1 x B
-
female connector, 1 x Terminal Block with TXD+, TXD
-
, RXD+ (RS
-
485), RXD
-
(RS
-
485), 1 x 9 pin serial RS
-
422/485 connector
Hardware system :
USB 1.1 or 2.0
Size / Weight :
92.8 x 40 x 23.1 mm / 400g
Packaging contents :
EX
-
1335HMV, 1 x USB cable A
-
male to B
-
male connector 2 meter with screw lock (EX
-
K1552), Driver
-
CD, Manual
Chip
-
Set :
FTDI
Data transfer rate :
300 Baud up to 921.6KBaud
Operating Temperature :
Operating Humidity :
0 up to 55
0
C
5 up to 95%
Anwendung/Application :
Operating System (OS):
Geprüft/Approved:
Verpackung/Packing:
Computer System
Notebook
USB
Waagen/
Balance
LED Display
Kartenleser
Card reader
Barcode Reader
Kassensysteme
P.O.S. System
N
e
w