User manual

Jun/07 MN2000000098

To Verify Windows® Installation

1. Right click My Computer and click Manage.

2. Select Device Manager.

3. Double click SCSI and RAID Controller, then double click

Silicon Image SiI 3114 SoftRaid 5 Controller to display driver

properties. A message this device is working properly is displayed

in the dialog box, the driver has been correctly installed.

SATARAID5 Management Software Installation

For Windows® 2000/XP/Server 2003/Vista

1. Please insert the driver CD into your CD-ROM Drive.

2. At the Windows desktop click Start, then Run.

3. Type D:\PCI_IO\SiI 3114\AP\32-bit Windows SATARAID5

Management\3114-W-I32-R_15100.msi, then click OK.

5. Insert the floppy disk, please select Silicon Image SiI 3114

SoftRaid 5 Controller (A:\si3114r5.inf), then press Next.

(Change A:\ to match your floppy drive letter)

6. Follow the on-screen instructions to complete the Windows

installation.

For An Existing Installation

1. Setup the RAID Array prior to driver installation and boot up to

Windows.

2. At Found New Hardware Wizard, select Locate and install

driver software (recommended).

3. Please insert the driver CD, click Next.

4. If the system prompts the user informing the drivers are not

signed, select the option Install this driver software anyway.

5. Click Close to complete the installation.