PCIe SATA II 300 4-Channel Adapter User Manual Ver. 2.00 All brand names and trademarks are properties of their Respective owners.
Features z Marvell 88SX7042 chipset z Upwards compatible with PCI-Express 8x, 16x z Compliant with PCI Express Base Specification 1.0a z Compliant with Serial ATA 1.
System Requirements z PCI Express-enabled system with one available PCI Express slot z Windows® 2000, XP, Server 2003, Vista Package Contents z 1 x PCIe SATA II 300 4-Channel Adapter z 1 x Driver CD z 1 x User’s Manual Optional Accessories z SATA Data Cable z SATA Power Cable Hardware Description Note: There are six SATA ports in PCIe SATA II 300 4-Channel Adapter. We name these ports A to F. Ports A to D are internal SATA ports and E & F are external SATA ports.
G (Jumper Settings) JP J2-J5 J6-J9 Description Active Port 1-2 close Enable SATA Connector D 2-3 close Enable SATA Connector E 1-2 close Enable SATA Connector C 2-3 close Enable SATA Connector F MN2000000130 Page 4
Hardware Installation 1. Turn Off the power to your computer and any other connected peripheral devices. 2. Unplug the power cord from the back of the computer. 3. Remove your computer’s cover. 4. Remove the slot bracket from an available PCI Express slot. 5. To install the card, carefully align the card’s bus connector with the selected PCI Express slot on the motherboard. Push the board down firmly, but gently, until it is well seated. 6.
5. Follow the same instructions to connect up to four hard drives. Device connection is now complete. 6. Replace the computer cover and reconnect the power cord. Driver Installation For Windows® 2000 1. At Found New Hardware Wizard, click Next. 2. Select Search for a suitable driver for my device(recommend) then click Next. 3. Insert the driver CD, check CD-ROM drives, uncheck the other boxes, click Next, then click Next again. 4. If the Digital Signature Not Found message appears, click Yes.
this time, then click Next. 2. Insert the driver CD, select Install the software automatically (Recommended), and click Next. 3. If the Hardware Installation window pops up, click Continue Anyway, then Finish. Our driver has been thoroughly tested for stability and compatibility. 4. Click Finish. For Windows® Vista 1. At Found New Hardware Wizard, select Locate and install driver software (recommended). 2. Insert the driver CD, click Next. 3.
To Verify Driver Installation 1. Right click My Computer and click Manage. 2. Select Device Manager. 3.
