manual

2-Port SATA3 RAID/HyperDuo PCIe Card
9
Note: Please refer to the manual file of Marvell Storage Utility
(MSU) on the CD (in the same folder as the drivers) for more detail
operations.
Q: What should I do if my disk array is broken?
If a disk array is broken, please don’t open the computer case
immediately to correct the problem before you backup all your
important data. It’s because you are most likely to make a mistake
in this abnormal condition.
PLEASE BACKUP YOUR DATA FIRST!
If your array is in RAID 1 mode or HyperDuo Safe mode, that means
your system is still running in the critical condition instead of dead. If
you backup your data by removable drives or network solution, you
will have a copy of up-to-date data away from this computer. Then
you are safe to correct the RAID problems even you open the
computer case or change the hardware settings. Some people
destroyed the data on the good drive by accident mistake when
they are changing drive or cables or modes. And they lost their
important data since they did NOT backup them first! For RAID 0
mode, please always backup the data since you will lost all data
when the array is broken.
8. Troubleshooting Tips