Datasheet
PCI-Express I/O Interface
2S Seriell RS-232 / 1P Parallel
Multi I/O PCIe Karte (MosChip)
2S Serial RS-232 / 1P Parallel
Multi I/O PCIe card (MosChip)
Beschreibung
Verpackung / Packaging System / OS
Geprüft / Approved
Die EX-44140-2 PCI-Express I/O Karte stellt zwei Serielle RS-232 High Performan-
ce UART 16C550 und einen Parallelen EPP/ECP Ausgang zur Verfügung. Sie ist
entwickelt worden um zwei weitere Serielle Ausgänge sowie einen Parallelen
Centronics Ausgang für PC, kleine Workstation oder Server über den PCI Express
Bus zu erweitern. Die Karte ist voll PCI-Express Plug-and-Play kompatibel und hat
keine Probleme mit IRQ und I/O Adressen Konflikten. Zusätzlich ist +5V oder +12V
auf Pin 9 des Steckers konfigurierbar für ein POS System (Power over System).
Merkmale
• Schnittstelle: Seriell RS-232 V.24 / Parallel EPP/ECP
• FIFO Buffer: 16C550 mit 16Byte
• I/O Adressen: werden vom Betriebs System vergeben
• Interrupt: wird vom System BIOS vergeben mit Interrupt Sharing
• Daten Bits: 5, 6, 7, 8 / Stop Bits: 1, 1.5, 2 / Parity: none, even, odd, space, mark
• Signale: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
• PCI Express Schnittstelle kompatibel zu 1.0a Spezifikation
Spezifikationen
• Chip-Set: MosChip MCS9901CV
• Datentransfer-Rate: 50 Baud bis 115.2KBaud
• Anschlüsse: 2 x 9 Pin D-SUB Seriell Stecker
1 x 25 Pin D-SUB Parallel Buchse
2 x 10 Pin Pfostenstecker für Interner Seriell Anschluss
1 x 4 Pin Stecker für den Anschluss des PC Netzteil
• Hardwaresysteme: PCI-Express Slot x1 bis x16
• Treiber: 2000/XP(32&64)/Vista(32&64)/Win7(32&64)
CE(4.2&5.0)/Server(2003&2008)/Linux(2.4.x&2.6.x)
• Betriebstemperatur : 0
0
bis 55
0
Celsius
• Lagertemperatur: -40
0
bis 75
0
Celsius
• Rel. Luftfeuchtigkeit: 5% bis 95%
• Stromversorgung: 3,3 Volt über PCI-Express Slot
• Abmessung: 65 x 70 mm
• Gewicht: 400g
• Lieferumfang: EX-44140-2, 1 x Slot-Adapter 25 Pin Parallel Buchse,
Treiber CD, Handbuch
Description
Features
Specifications
Anwendung / Application
Server
P.O.S
Barcode
Card reader
Balance
Terminal
Display
Modem
EX-44140-2
The EX-44140-2 PCI-Express I/O adapter provides s high performance 16C550-
type UART compatible RS-232 serial ports and one Parallel Centronics EPP/ECP
port. It is designed for PC, thin client or server to provide instant COM and LPT
port expansion via the PCI Express Bus (PCIe). The card is fully PCI Express Plug
-and-Play compatible and there are no IRQ and I/O address configuration prob-
lems. It additionally provides +5V and +12V via the pin9 at the male connector for
a POS System (Power over System).
• Interface: Serial RS-232 V.24 / Parallel EPP/ECP
• FIFO Buffer: 16C550 with 16Byte
• I/O addresses: Setting from the operating system
• Interrupt: Setting from the System BIOS with Interrupt Sharing
• Data Bits: 5, 6, 7, 8 / Stop Bits: 1, 1.5, 2 / Parity: none, even, odd, space, mark
• Signal: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
• PCI Express Interface: Fully compliant with 1.0a Specification
• Chip-Set: MosChip MCS9901CV
• Data transfer rate: 50 Baud up to 115.2KBaud
• Connectors: 4 x 9 pin D-SUB serial connector with Octopus cable
1 x 25 pin D-SUB parallel connector with Octopus cable
2 x 10 pin plug for internal serial connection
1 x 4 pin plug for power via the PC power supply
• Hardware system: PCI-Express Slot x1 up to x16
• Driver: 2000/XP(32&64)/Vista(32&64)/Win7(32&64)
CE(4.2&5.0)/Server(2003&2008)/Linux(2.4.x&2.6.x)
• Operating Temperature : 32
0
up to 131
0
Fahrenheit
• Storage Temperature: -40
0
up to 167
0
Fahrenheit
• Rel. Humidity: 5% to 95%
• Current Supply: 3.3 Volt via PCI-express slot
• Size: 65 x 70 mm
• Weight: 400g
• Packaging contents: EX-44140-2, 1 x Slot adapter with 25 pin parallel male,
Driver CD, Manual
EX-44140-2
Work-
station
Printer
Scanner