Datasheet
Konverter von RS-232 zu RS-422/485
inklusive Terminal Block
Converter from RS-232 to RS-422/485
included Terminal Block Adapter
The EX-47905 RS-232 to RS-422/485 converter is design for your PC, workstation, thin
client or server to provides instant RS-422/485 Serial port expansion via the standard
RS-232 port. The EX-47905 equipped a DB 9 female connector that can be connected
directly to the RS-232 connector from your PC. The EX-47905 converts unbalanced,
full-duplex RS-232 signals to balanced, full or half-duplex RS-422 or RS-485 signals.
With the EX-47905 we include the adapter from 9 pin to 5 pin Terminal Block.
Der EX-47905 RS-232 zu RS-422/485 Konverter kann für jeden PC, Workstation oder
Server mit einer RS-232 Schnittstelle eingesetzt werden. Die EX-47905 ist mit einer
9 Pin Buchse ausgestattet, die Sie direkt an Ihre Serielle RS-232 Schnittstelle
anschliessen können. Er wandelt unsymmetrische, Full-Duplex RS-232 Signale in
symmetrische Full oder Half-Duplex RS-422 / 485 Signale um.
Schnittstelle: RS-232
· Signale: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
· Loop Back Verdrahtung: RTS zu CTS, DTR zu DSR und DCD
Schnittstelle: RS-422/485
· Zwei Einstellungen sind möglich: 4-Draht RS-422 (TxD+/-, RXD+/-, Half-duplex) /
2-Draht RS-485 (Data+/-, Data+/-, Full-duplex)
· ATTA
TM
: Unterstützt RS-485 Auto Transceiver Turn Around Feature, Unterstützt
Echo Mode für RS-485 Mode
· Terminator: 120 Ohm, kann ein– oder ausgeschaltet werden mit DIP Switch
· Betriebs-Spannung kommt vom RS-232 Signal, externe Spannung’s-Zufuhr ist
möglich wird aber in den meisten Fällen nicht gebraucht
Interface: RS-232
· Signal: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
· Loop Back Wiring: RTS to CTS, DTR to SDR and DCD
Schnittstelle: RS-422/485
· Two modes are selectable: 4-wire RS-422 (TXD+/-, RXD+/-, Half-duplex) /
2-wire RS-485 (Data+/-, Data+/-, Full-duplex)
· ATTA
TM
: Supports RS-485 Auto Transceiver Turn Around Feature, Support Echo
Mode for RS-485 mode
· Terminator: 120 Ohm, can be Enabled/Disabled by DIP switch
· Port-powered from RS-232 Lines, External Power Source Supported, but not
required in most cased
· Datentransfer-Rate: 300 Baud bis 115.2KBaud
· Anschlüsse: 1 x 9 Pin D-SUB Seriell RS-232 Buchse
1 x 9 Pin D-SUB Seriell RS-422/485 Stecker,
mit Adapter 5 Pin Terminal Block
· Hardwaresysteme: RS-232 Schnittstelle
· Betriebssysteme: Für alle Betriebssysteme geeignet
· Betriebstemperatur : 0
0
bis 55
0
Celsius
Lagertemperatur: -40
0
bis 75
0
Celsius
· Luftfeuchtigkeit: 5% bis 95%
· Abmessung: 49 x 41 x 22 mm
· Gewicht: 200 g
· Lieferumfang: EX-47905, 9 Pin zu 5 Pin Terminal Block,
USB Power Kabel, Handbuch
· Data transfer rate: 300 Baud up to 115.2.2KBaud
· Connectors: 1 x 9 pin D-SUB serial RS-232 female
1 x 9 pin D-SUB serial RS-422/495 female
with adapter 5 pin Terminal Block
· Hardware system: RS-232 Interface
· Operating system: Can use for all operating system
· Operating Temperature : 32
0
up to 131
0
Fahrenheit
Storage Temperature: -40
0
up to 167
0
Fahrenheit
· Humidity: 5% to 95%
· Size: 49 x 41 x 22 mm
· Weight: 200
· Packaging contents: EX-47905, 9 pin to 5 pin Terminal Block,
USB power cable, Manual
Beschreibung Description
FeatureMerkmale
Spezifikationen Specification
Betriebssystem / OS
Geprüft / Approved
Verpackung / Packaging
Anwendung / Application
EX-47905
Converter
Server
19“ Rack
Work-
station
Seriell RS-422/485 Geräte
Serial RS-422/495 Device
EX-47905
RS-232 Port
Einsetzbar für alle OS / works with all OS