User manual

USER MANUAL
23
DISPLAY ROTATION
4 options available: “0°, 90°, 180°, 270° under the
Extended or Primary display modes. It is a useful
function for some rotatable display device.
DISPLAY MODES
 “EXTENDED” DISPLAY MODE (DEFAULT)
A default display mode; this feature allows the attached
USB Display enabled display device to work as
“Extended” display of the on-board screen. The extended
working space improves work efficiency.
You may change the relative position of this extended
USB Display enabled display device under the Display
Settings.
 “MIRROR” DISPLAY MODE
This feature allows the same contents of on-board
screen to be displayed (mirroring) to the USB
Display enabled display device.
The screen resolution setting on the USB Display
enabled device will follow the on-board screen‟s
resolution. For example, if the on-board
screen‟s resolution is 1024x768x32bit, and the
USB Display enabled device will set as the same resolution.
 “PRIMARY” DISPLAY MODE
A unique feature to allow USB Display enabled device
to act as the main working display. The USB 3.0 Display
Adapter will work as the main graphics adapter of the
system. The on-board screen will work as the extended
display.
Please be advised that some display utility and drivers
that shipped with certain AGP and built-in display