User manual

USER MANUAL
8
Step 5.
Select “Yes, I want to restart my computer now”, and click “Finish” to reboot.
Step 6. HARDWARE DEVICE DRIVER INSTALLATION
After reboot, please connect the external display device (monitor/projector) to the
VGA/HDMI connector of USB 3.0 DISPLAY ADAPTER and turn on the display
device.
Then plug the USB 3.0 DISPLAY
ADAPTER into an available USB 3.0
port of your PC or Notebook. The
device driver software setup will begin
automatically.
After the driver is configured, you also
could click “Show hidden icon” and will
see the “Super Utility” icon on taskbar.
The extended display will be shown on
the attached display device. You may
begin to use the USB 3.0 Display
Adapter with your display device.