User Manual

ManualsBrandsExsys ManualsComputing & Network ProductsPCIe Gigabit Ethernet Network Card with 4x RTL8153B Realtek Chipset

Thank you for purchasing this 4-Port Gigabit Ethernet to PCIe Host Adapter

(hereinafter “the Product”). The Product is in PCI Express form factor with a built-in

USB3.1 (Gen 1) Host Controller and 4 USB3.1 Gigabit Ethernet Converters to provide

an instant expansion of 4 Gigabit Ethernet ports for your Desktop, Server and

Thin-Client computers.

The Product complies PCI Express, USB3.1 Gen 1 and 10/100/1000 Ethernet

specifications. It provides an ideal solution to expand your Ethernet ports for all

Network based applications.

4-Port Gigabit Ethernet to PCIe Host Adapter

Installation Guide

1. Introduction

2. Connector Layout

J4: Gigabit Ethernet Ports:

Port 1

SW1: Ports Enable/Disable Switch

Port 4

Low Profile Bracket

JP1: AUX Power

Enable/Disable

Summary of content (6 pages)

PAGE 1
4-Port Gigabit Ethernet to PCIe Host Adapter Installation Guide 1. Introduction Thank you for purchasing this 4-Port Gigabit Ethernet to PCIe Host Adapter (hereinafter “the Product”). The Product is in PCI Express form factor with a built-in USB3.1 (Gen 1) Host Controller and 4 USB3.1 Gigabit Ethernet Converters to provide an instant expansion of 4 Gigabit Ethernet ports for your Desktop, Server and Thin-Client computers. The Product complies PCI Express, USB3.
PAGE 2
4-Port Gigabit Ethernet to PCIe Host Adapter Features: ✓ Fully PCI Express Gen 2 Specification Compliant ✓ Supports Low Profile Form Factor ✓ Compliant with USB Specification 3.1 Gen 1 ✓ Onboard Windows Drivers, no Extra Driver is Required for Installation in major Windows ✓ Adds 4 RJ45 Gigabit Ethernet Ports (10/100/1000M) ✓ A DIP Switch to Enable/Disable Each Port ✓ Supports IEEE 802.3, 802.3u, and 802.3ab, 802.1Q ✓ Supports IEEE 802.
PAGE 3
4-Port Gigabit Ethernet to PCIe Host Adapter JP1: AUX Power Enable/Disable Settings Jumper Position Settings Stand-by Power is disabled (Default): The Product is not powered by the Stand-by power (3.
PAGE 4
-Port Gigabit Ethernet to PCIe Host Adapter 3. Installing the Product Installing drivers for USB3.1 Gen 1 Host Adapter The Product has built-in a PCI Express USB3.1 Gen 1 host controller which may need drivers for early Windows. The following table gives a summary for the OS which need drivers. For Windows 8.x or above, they do not need any drivers due to their kernel supports USB3.1 Gen 1 directly. OS Win XP Vista Windows 7 USB1.1 Supports (1.5Mbps, 12Mbps) Yes Yes Yes USB2.
PAGE 5
4-Port Gigabit Ethernet to PCIe Host Adapter 2. You have 2 choices to install the drivers. The first is to follow the instructions of the Windows’ Wizard to complete the whole installations. 3. Or we strongly recommend you click “Cancel” to abort the Windows’ Wizard installation and turn to run (by double-clicking) the Installer program (for example, setup.exe file) in the E:\USB 3.0\RENESAS\UPD720201_202 folder on the driver CD.
PAGE 6
4-Port Gigabit Ethernet to PCIe Host Adapter You will see only the Port 1 shown on Windows Device Manager, assigned as Ethernet Port #1 8. Set switch Pin 2 to ON while still keep Pin 3 and 4 at OFF, Windows then install the drivers for Port 2 and adds Ethernet Port #2 to its Device Manager 9. Set switch Pin 3 to ON, adds Ethernet Port #3 10.