Datasheet

Seite 1 www.exsys.de | www.exsys.ch | www.exsys.it
EX-6203
Unmanaged Switch
6-Port Industrial Ethernet Unmanaged Switch
4*10/100Tx + 2*100Fx, 12-48VDC Power Input
Feature
Picture
Specification
Technology
Standards
IEEE 802.3 10BaseTX Ethernet
IEEE 802.3u 100BaseTX Fast Ethernet
Processing Type Store and Forward
Protocol CSMA/CD
Flow Control IEEE 802.3x flow control, back pressure flow control
Switch Properties
Switch Architecture Back-Plane: Non-Blocking Switching Fabric
Transfer Rate
14,880 for Ethernet Port
148,800pps for Fast Ethernet Port
Memory Buffer 448Kbits
MAC Table size 2K
Interface
RJ45 Ports 4*10/100Base T(X), auto negotiation speed, Full/Half duplex mode and auto MDI/MDI-X connection
Fiber Port
2*100Fx SC/ST type connector
Multi-mode (2Km) - 50/125um or 62.5/125um
Single-mode (30Km) - 9/125um or 10/125um
LED Indicators
Power 1, Power 2, Fault
Ethernet Ports: On-Link/Flash-data transmitting
Fiber Ports: On-Link/Flash-data transmitting
Wavelength 1310nm
Network Cable
10BaseT: 2-pair UTP/STP Cat. 3, 4, 5 cable EIA/TIA-568 100-ohm (100m)
100BaseT: 2-pair UTP/STP Cat.5 cable EIA/TIA-568 100-ohm (100m)
Power Requirements
Input Voltage 12-48VDC, Redundant Input
Overload Current Protection Present (Slow-Blow Fuse)
Power Connection 1 removable 6-contact terminal block
Reverse Polarity Protection Present
Power Consumption 6.0Watts
Relay Contact 24VDC, 1A resistive
• 4-Port 10/100Tx Fast Ethernet
• 2-Port 100Fx - SC/ST connector (Multi/Single Mode)
• Redundant Power Input Design 12 - 48VDC
• Built-in Relay Output Warning for Power Failure
• IP30 Rugged Metal Case Design
• Incl. Din-Rail Kit and Metal plate
• Auto-MDI-MDIX don’t need crossover cable
• No configuration and installation need
• Operating Temperature Range: -10°C to +65°C
• Optional available EX-6203-T for operating temperature from
-40°C to +75°C