User Manual

ManualsBrandsExtang ManualsAutomotiveExtang Blackmax Truck Bed Tonneau Cover | 2940 | fits Chevy/GMC Silverado/Sierra (6 1/2 ft) 99-06, 07 Classic (incl HD)

PARTS INCLUDED IN YOUR KIT. You may want to lay them out in this manner for accessibility.

MISSING PARTS???

call Extang at 1-800-877-2588

Any and all needed parts will be shipped to you

directly. (DO NOT return whole kit to store)

Visit us at:

www.extang.com

Item No. 0016-1202 RH Printed in U.S.A.

INSTALLATION SHEET

“U” Shaped Clamps

Note: LONG BED trucks have

8 clamps and 4 bows.

Remove paper tape from all rails. Discard properly.

Foam has NO adhesive to

touch truck finish.

Wash truck bed.

PLEASE

DO NOT

LITTER

Depress the ClickLock

release and remove one corner

from cab rail.

Feed tarp dowel into cab rail.

(NOTE: For easiest feeding action, place tarp on a flat

smooth surface, and keep dowel straight while feeding

into cab rail. Caution, pavement may scuff tarp.)

Reinsert corner piece into cab

rail until it “clicks” and locks

into place.

ClickLock

NOTE:

LACK

has snaps on all rails.

Allen Wrench

Clamp Bolts

Tarp

Corner Pieces

NEW Improved

“DOUBLE HOOK”

Side Rail Clamps

Off the truck bed, connect

the end rails to the two

side rails utilizing the

ClickLock™ clips.

For Classic Platinum Only (This step does not apply to BlackMax)

Cab Rail

(BlackMax includes snaps on this rail)

Tailgate Rail

Side Rails

Spring Bows

(x3-Short Bed)

(x4-Long Bed)

Extang Corporation

1901 E. Ellsworth Rd.

Ann Arbor, MI 48108

734 677-0444, Fax: 734 677-8409

Summary of content (2 pages)

PAGE 1
IN S TAL L ATI O N S H E E T b Ra il Spring Bows (x3-Short Bed) (x4-Long Bed) (B x a M ck la NEW Improved “DOUBLE HOOK” Side Rail Clamps Ca cl in u s e d sn p a Sid ail th e is at lg n o i Ta s eR s il ra ) il Ra Tarp MISSING PARTS??? call Extang at 1-800-877-2588 Clamp Bolts “U” Shaped Clamps Note: LONG BED trucks have 8 clamps and 4 bows. Corner Pieces Any and all needed parts will be shipped to you directly.
PAGE 2
For an OVER-THE-RAIL Bedliner 5 DIAGRAM A Place the rail assembly over the side of the truck box. Center rails evenly between cab and tailgate. (NOTE: Some applications Note: For over-the-rail bed liners first refer to Diagrams A and B above. B Side rail clamped to bed with bow attached. For each clamp mark on your bedliner a 1-1/2” x 3” hole as shown above. Remove clamp. Cut holes in bedliner. Reinsert side rail clamp. Return to step 6. have hard rubber risers (square rubber pad.