Installation Manual

ManualsBrandsExtang ManualsAutomotiveExtang Express Tool Box Roll-up Truck Bed Tonneau Cover | 60720 | fits Ford Super Duty Short Bed (6 1/2 ft) 99-16

PARTS INCLUDED IN YOUR KIT. You may want to lay them out in this manner for accessibility.

MISSING PARTS???

call Extang at

1-800-877-2588

Any and all needed parts

will be shipped

to you directly.

(DO NOT return

whole kit to store)

extang.com

I t e m N o . 0 2 3 3 - 1403 RH P r i n t e d i n U . S . A .

I N S TALL ATION SHEET

NOTICE:

If your truck has a

bedliner that

wraps over any

top edges, the

liner will have to

be trimmed to fit

this product.

“L” Channel

w/Seal

Remove paper tape from all

rails. Discard properly.

Foam has NO adhesive to

touch truck finish.

P L E A S E

D O

N O T

L I T T E R

Wash truck bed.

With the toolbox in place,

position L-channel against

toolbox and center.

Allen Wrench

U Clamps

(x 6)

Clamp Bolts

Tarp Assembly with Cab

Rail, Tail Rail and Support

Bows attached.

Left and Right

Side Rail Assemblies

Place side rails on side walls of truck bed with

plastic end laying over the L-channel. Adjusting

screws go toward the toolbox. Locking catch goes

on left side toward the tailgate as shown.

L Channel

Extang Corporation

5400 S. State Road

Ann Arbor, MI 48108

734 677-0444, Fax: 734 677-8409

Center the side rail between the

Tailgate and the L-channel/toolbox.

Locate three pre-drilled holes on the rail for U–clamps.

Summary of content (6 pages)

PAGE 1
IN S TA L L AT I O N S HEET Tarp Assembly with Cab Rail, Tail Rail and Support Bows attached. Left and Right Side Rail Assemblies U Clamps (x 6) NOTICE: If your truck has a bedliner that wraps over any top edges, the liner will have to be trimmed to fit this product. “L” Channel w/Seal Clamp Bolts MISSING PARTS??? call Extang at 1-800-877-2588 Any and all needed parts will be shipped to you directly. Allen Wrench (DO NOT return whole kit to store) PARTS INCLUDED IN YOUR KIT.
PAGE 2
6 7 Tighten clamp bolts to hold rail in place. Lay assembled tonno into truckbed over L channel. Insert U-clamp into the side rail. Tighten bolts with small Allen wrench provided. Repeat steps 3 and 4 for the other rail. 8 9 Engage the narrow edge of the cab rail to the pivot blocks and rotate the rail down while pulling the cabrail back against the pivot block. IMPORTANT: If tarp touches toolbox, move side rails back. 10 Prior to driving vehicle make sure both slide locks at cab rail are secure.
PAGE 3
Par ts List NOTE: To order replacement parts, itʼs best to contact our Customer Service Department for assistance, to ensure getting the correct part for your vehicle application. When ordering, xxx represents the 3 digit suffix, as referenced on the sales receipt or vehicle application list. Additional parts information can be found on our website, at http://extang.com/how.html.
PAGE 4
Par ts List NOTE: To order, xxx represents the 3-digit application # (vehicle type) following the 1- or 2-digit prefix, as referenced on the vehicle application list or sales receipt. Or call our Customer Service Department at 1-800-877-2588 for assistance.
PAGE 5
READ CAREFULLY - KEEP IN A SAFE PLACE PLEASE ATTACH AND SAVE YOUR SALES RECEIPT. ACTIVATE YOUR wARRANTY ONLINE AT ExTANg.COm. Maximum Strength Warranty - Lifetime frame and tarp warranty covers the following tonneaus: Revolution, Express, Trifecta and eMAX. ■ WARRANTY DURATION: Lifetime Frame – Extang offers a LIFETIME warranty against defective materials or workmanship on the Revolution, Express, Trifecta and eMAX rails, aluminum components, clamps, bows, hardware.
PAGE 6
SOMETHING DAMAGED? MISSING PARTS? CALL US FIRST 800-877-2588 WE CAN HELP YOU QUICKLY AND EASILY OVER THE PHONE Experienced Customer Service staff to answer all your tonneau questions CUSTOMER SERVICE HOURS: Printed in U.S.A. AMERICA’S #1 SELLING TONNEAU 8:30 TO 5 EST, MONDAY - FRIDAY Tonno Model: __________________________________ Purchase Date:_________________________________ Lot Code:______________________________________ Lot code can be found on underside of cover. Part No.