Installation Manual

Remove any snow
or foreign matter
before folding
To prepare the Trifecta 2.0 to
drive in the open position,
release the rear (tailgate)
clamps and fold the
cover forward.
Fold the cover forward
and fasten BOTH straps
in the middle section
to the front rail.
IMPORTANT: Before folding
the second section of the
cover, the rear (tailgate) clamps
must be stowed securely
into the rail.
IMPORTANT NOTICE
While driving, cover must be completely at and secure with all four clamps
in the closed position or completely folded up (all panels) and secured
at the cab. DO NOT DRIVE with cover in partially opened position.
Do NOT tow your vehicle from the rear with
any Extang bed cover on your truck
Front (cab clamp)
Rear (tailgate clamp)
Add clamp plate
as shown here
Front (cab clamp)
Rear (tailgate clamp)
Add clamp plate
as shown here
Special Instructions for Alternative Brackets