Installation Manual

ManualsBrandsExtang ManualsAutomotiveExtang Trifecta 2.O Soft Folding Truck Bed Tonneau Cover | 92915 | fits Toyota Tacoma (6 ft) 05-15

It is important that all areas

where the bed cover mounts

are clean and free of debris

prior to installing.

Place assembled cover over the cab

end of the truck box.

The Trifecta 2.0 truck bed cover

comes fully assembled.

Note any damaged or missing

components before installing.

3 1 9 2 0 9 0 0 - 3 0

Unfold the cover fully and adjust position

over the truck bed for proper

front (cab) / rear (tailgate) alignment.

Carefully refold the cover without

shifting its position on the truck bed.

Item No. 31920900-30 12.16 DD

Extang, Corp., 2017. Printed in USA

Summary of content (6 pages)

PAGE 1
The Trifecta 2.0 truck bed cover comes fully assembled. Note any damaged or missing components before installing. It is important that all areas where the bed cover mounts are clean and free of debris prior to installing. Unfold the cover fully and adjust position over the truck bed for proper front (cab) / rear (tailgate) alignment. Place assembled cover over the cab end of the truck box. Carefully refold the cover without shifting its position on the truck bed.
PAGE 2
If your truck has a bed cap or bedliner that covers the metal bed wall ange, you will need to remove enough so that all the clamps make solid contact. For bed caps, trim only enough of the bed cap edge so the rear (tailgate) clamp contacts the bottom of the metal ange. For bed liners that cover the metal ange, trim a minimum of 100 mm or 4” of the liner wall so the clamps contact the bottom of the metal ange. 100mm 4.
PAGE 3
To prepare the Trifecta 2.0 to drive in the open position, release the rear (tailgate) clamps and fold the cover forward. Fold the cover forward and fasten BOTH straps in the middle section to the front rail. IMPORTANT: Before folding the second section of the cover, the rear (tailgate) clamps must be stowed securely into the rail.
PAGE 4
Front (Cab) Seal 92xxx-16 93xxx-16 94xxx-16 Tarp 92xxx-20 93xxx-20 94xxx-20 Buckle Assembly Front 31920120 Front (Cab) Clamp 92xxx-76 93xxx-76 94xxx-76 Cab Hinge Assembly (with Seal) 92xxx-63 93xxx-63 94xxx-63 Cab Hinge Seal only 31920104 Rear (Tailgate) Seal 92xxx-18 93xxx-18 94xxx-18 Corner Seal 92xxx-19 93xxx-19 94xxx-19 Tie Down Strap 54440400 Rail Seal 92xxx-17 93xxx-17 94xxx-17 Rear (Tailgate) Clamp 92xxx-77 93xxx-77 94xxx-77 Specify: Year, Make, Model, bed length, Driver or Passenger side.
PAGE 5
MAXIMUM STRENGTH WARRANTY LIFETIME FRAME & TARP FOR THE FOLLOWING TRUCK BED COVERS: REVOLUTION, EXPRESS, TRIFECTA, TRIFECTA 2.0 & EMAX WARRANTY DURATION Lifetime Frame – Extang offers a LIFETIME warranty against defective materials or workmanship on the Trifecta 2.0, Trifecta, eMAX, Revolution and Express rails, aluminum components, clamps, bows, hardware. Lifetime Tarp – Extang offers a LIFETIME warranty against defective materials or workmanship on the Trifecta 2.
PAGE 6
SOMETHING DAMAGED? MISSING PARTS? CALL US FIRST 800-877-2588 WE CAN HELP YOU QUICKLY AND EASILY OVER THE PHONE RAPID RESPONSE OVERNIGHT DELIVERY Experienced Customer Service staff are available to answer all your truck bed cover questions CUSTOMER SERVICE 8:30 TO 5 EST, MONDAY - FRIDAY Tonno Model: ________________________________________ Purchase Date:_______________________________________ Lot Code:____________________________________________ Lot code can be found on underside of cover.