user manual

Page 26
Character Control Hex/Dec CONTROL ACTION
CANCEL ^X 18/24 Cancel and reset printer
If received, print buffer is reset and printer placed in
initial power-up default settings.
ESC ^[ 1B/27 Escape
Escape character precedes graphics and printer
operating modes. Refer to escape command section.
EXTEND ^\ 1C/28 Extended print
All characters following this command are printed
double high (5x14).
EXTEND
OFF
^] 1D/29 Extended print off/Normal print
All characters following this command are printed
normal size (5x7)
Auto Paper Load
§ Procedure A.
x Turn on the printer
x Lift up the head lever. The red ERROR led will remain on for 60 seconds.
x Insert paper to the print head and lower the lever. The auto-paper-load will feed the paper through
for 2.00".
§ Procedure B.
x Turn on the printer
x Press the FEED/ADVANCE button. The red ERROR led will remain on for 60 seconds.
x Insert paper to the print head. The auto-paper-load will feed the paper through for 2.00".