User Manual

42280 V3.0 10/2007

Connecting the Meter to a PC

A USB cable is provided with the meter. One end of the cable connects to the meter’s

USB jack and the other end connects to a USB port on the PC.

Running the supplied PC software

The supplied PC software is included on the supplied CD-ROM. Insert the CD into the

computer’s CD-ROM drive and follow the on-screen prompts and instructions. In the

software COM PORT SETTING field, select the COM port to where the meter is

connected.

Software Datalogging Parameters

From the main software screen, select LOGGER SET and set the sample rate, sample

points, and start mode. These are described in some detail in the separate software

manual and the software HELP utility on the supplied CD-ROM. Remember to press

‘OK’ after changing a setting to ensure that the software processes the changes. The

meter is now ready to record.

Transferring readings to PC

1. Connect and run the supplied software as previously described.

2. Press the DOWNOAD START button on the main software screen to transfer the

readings.

3. The separate software instructions supplied in the software’s HELP utility explain

how to view, graph, save, export and print the downloaded data.

NOTE: The Software’s HELP utility provides in-depth software and downloading

instructions, which is beyond the scope of this user guide; please refer to the HELP

utility in the supplied software program for detailed guidelines and instructions.