Datasheet

PRODUCT DATASHEET
Features
PRODUCT DATASHEET
DV26 CAT IV Non-contact Voltage
Detector + Flashlight
Rugged CAT IV rated non-contact Voltage (NCV) Detector displays a Green
LED light when it is powered on and ready for use. When flashing Red LED
with audible beeper sounds, this indicates the presence of live wires. The
convenient built-in bright flashlight allows for viewing in dimly lit areas.
Features
• Non-contact detection of AC Voltage from
100 to 1000VAC
• For use on 50/60Hz circuits
• CAT IV-600V, CAT III-1000V safety rating
• Rugged double-molded housing
• Green LED indicator lights up when powered
on and ready to use
• Tip fits into outlets or against wire insulation testing
• Flashing Red LED indicator light with audible beeper
indicates presence of live wires
• Built-in bright flashlight with On/Off button
• Compact size with pocket clip
• 6.25 x 1” (159 x 25mm); 1.5oz (42g)
• Complete with two AAA batteries
Ordering
DV26 ................. CAT IV Non-contact Voltage Detector + Flashlight
www.extech.com
Specifications subject to change without notice. Copyright © 2012-2014 FLIR Systems, Inc. All rights reserved including the right of reproduction in whole or in part in any form.
Rev. 9/3/14