Datasheet

ManualsBrandsEXTECH ManualsTest & MeasurementHandheld multimeter, Current clamp digital CAT II 1000 V, CAT III 600 V Display (counts): 6000

600A Clamp Meters for HVAC/R & Electrical Pros Tackle Ghost Voltage & More

All in one functionality - True RMS, LoZ, Low-Pass Filter, MicroAmps, Built-in Voltage Detector

EX650

• Diagnostics & Troubleshooting

• New construction

• Service & maintenance

• Commercial electrical

• Plant motor & manufacturing equipment predictive maintenance

EXTECH’S EX650 SERIES CLAMP METERS:

Ready for tough HVAC, industrial and electrical troubleshooting/

predictive maintenance challenges:

• 1.18” (30mm) jaw size handles conductors up to 350MCM

• True RMS for precise AC readings ensures accuracy even with distorted signals

• AC current testing to 600A (AC and DC current available on EX655)

• Low Impedance (LoZ) mode overcomes “ghost voltage” errors

• Integrated Non-Contact Voltage Detector

• Microamp (µA) mode for ﬂame rod testing

• Data hold freezes a displayed reading

• Min/Max captures highest and lowest readings

• Low Pass Filter (LPF) to reduce high frequency noise for accurate readings (EX655)

• Ultra-wide temperature range: -40 to 1832°F (-40 to 1000°C) (EX655)

For Electrical

Contractors &

Industrial Electrical

Maintenance:

EX655

• Troubleshooting A/C, heating, refrigeration

• New installations

• Equipment upgrades

• Temperature-related readings

• Residential & commercial maintenance

• Testing ﬂame sensor function

For HVAC/R

& Mechanical

Professionals

Compare against the competition:

• True RMS

• LoZ Low Impedance loading

• Low-Pass ﬁlter

• Built-in non-contact voltage detector

• CAT-III 600V rating

• 600A AC current testing, AC/DC current (EX655)

• Temperature measurement (EX655)

• Microamp ﬂame rectiﬁcation testing

• 4000 count display (EX650) count display (EX655)

WHAT YOU GET:

• EX650/EX655 clamp meter

• Test leads

• Temperature bead probe

(EX655)

• Batteries

• Three-year warranty from a

trusted brand

Say Goodbye to Ghost Voltage!

Ever get a voltage reading on a circuit that should have been off and reading

zero? It could be “ghost” voltage hopping over, through capacitive coupling, from

an energized wire near the circuit under test. Ditch the antiquated and heavy,

“wiggy”-style solenoid volt meter for low impedance ghost voltage testing. The

EX650 series DMMs with “LoZ” mode help eliminate false readings from stray

ghost voltage.

Standard meter shows six volts of ghost voltage, meter with LoZ shows correct

reading of zero volts.