Manualshelf

User manual

ManualsBrandsEXTECH ManualsTest & MeasurementCurrent clamp, Handheld multimeter digital Calibrated to: Manufacturer standards CAT III 1000 V, CAT IV 6
6789101112131415
MA3110-en-GB_V1.0 12/16
12
Capacitance Measurements
CAUTION: Discharge the capacitor under test before taking any capacitance
measurements
1. Connect the black test lead into the COM terminal.
2. Connect the red test lead into the ‘Ω’ terminal.
3. Power the meter using the power button .
4. Put the function switch to the ‘Ω’ position.
5. The display will show the ‘AUTO’ icon (Auto Range mode).
6. Press the M (Mode) button to select the capacitance mode.
7. Press the test leads across the circuit under test and read the capacitance on the display.
8. In the Auto Range mode, the meter will automatically select the optimal range.