Datasheet

Ordering Information:
MO265 ..............Combination Pin/Pinless Moisture Meter
MO200-PINS ....Replacement Pins (20 pins)
MO-P1 ..............Replacement Remote Pin Probe
Specifications subject to change without notice.
Copyright © 2010-11 Extech Instruments Corporation. All rights reserved including the right of reproduction in whole or in part in any form.
www.extech.com
12/19/11 - R1
Features:
• %WME (wood moisture equivalent) pin moisture reading
• Relative pinless moisture reading for non-invasive measurement
• Digital LCD readout with backlighting feature and tri-color LED bargraph
• Quickly indicates the moisture content of materials
• Pinless measurement depth to 0.75" (22mm) below the surface
• Electro-magnetic sensing technology
• Built-in calibration check
• Replaceable measurement electrode pins
• Low battery indication
• Cap protects pins during storage and can be snapped
on to the side of the housing during use
• Includes remote pin probe to measure moisture
in difficult to access areas
• Complete with 9V battery, remote pin probe (MO-P1),
replacement pins, protective cap, and hard case
Non-invasive or contact moisture measurements
Choice of measuring moisture in wood and other building materials with pinless technology
creating virtually no surface damage or use traditional pin type measurement directly from the
meter or a remote pin probe (included)
Combination Pin/Pinless Moisture Meter
Specifications Non-Penetrating (Pinless) Pin
Range 0 to 99.9 (relative) 6.0 to 99.9%
Max Resolution 0.1 0.1%
Dimensions 8x2.3x1.7" (203x58.4x43.2mm)
Weight 7.2oz (204g)
Measures relative moisture
of various building
materials including wood,
particle board, carpeting,
and ceiling/ bathroom tiles
using non-invasive Pinless
Technology
Measures % of Moisture in
sheet rock and other building
materials using direct pin
method. Protective cap snaps
onto the side of the housing
during use.
Pin Moisture Probe (MO-P1)
included for making contact
moisture measurements