User manual

10 WB200-EU-EN V1.4 8/13
Specifications
LCD Display 7-segment digit type for readings and messages
Function icons above and below reading for units and mode status
Low battery indication
LED status indicator Flashes red in an Alarm condition
Flashes green when a reading is logged
Audible Alert Sounds intermittently when in an Alarm condition
Response time 120 second update rate
Temperature Units Switchable Temperature units (
o
C/
o
F)
Measurement ranges Temperature (air, wet bulb, dew point): 5 to 50
o
C (41 to 122
o
F)
Relative Humidity: 0.0 to 99.9%
Resolution 0.1
o
C/F (air, dew point, and wet bulb temperature)
0.1% Relative Humidity
Accuracy RH: ± 3% (10 to 90%RH @ 25
o
C; ± 5% outside of this range)
Air, Dew Point, and Wet Bulb Temperature: ± 0.6
o
C (1
o
F)
Datalogger memory Up to 100 reading sets (each set includes one measurement from each
of the four measurement modes). Recall readings directly on the
meter’s LCD display. The internal memory is non-volatile.
Datalogging sample rate Programmable from 15 minutes to 60 minutes in 5 minute increments
Over range indication "E3" appears on the LCD
Under range indication "E2" appears on the LCD
Low battery indication Empty battery symbol appears on the LCD (
)
Water tank capacity 120ml (4 oz.)
Power supply Four (4) 1.5V ‘AAA’ batteries or 5V universal power adaptor (included)
LCD Dimensions 24 (H) x 40 (W) mm / (0.94 x 1.58’’)
Meter Dimensions
70.8 (top cover) x 77.6 (bottom cover) x 177 (H) mm / (2.8 x 3.1 x 7.0’’)
Weight 250g (8.0 oz.) with batteries installed
Copyright © 2013 FLIR Systems, Inc.
All rights reserved including the right of reproduction in whole or in part in any form
ISO-9001 Certified
www.extech.com