Installation Guide

complete. Note: The last molded corner to be installed in a column may need to be cut to fit the
remaining space in that column.
INSTALLING STONE LEDGE TRIM
Stone ledge trim installs over the top course of panels
BENDING LEDGE TRIM
Stone ledge trim can be installed around a corner. Because of the different shape of the ledge trim, a v-
notch must first be cut at the point where you plan on bending it (Figure #12). Once the v-notch has
been cut, the trim may be heat-bent and installed. We also provide pre-manufactured corners to make
installation easier (Figure 13).
Figure 12 Figure 13
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
SPECIAL SITUATIONS AND SUGGESTIONS
SITUATION
1. Panels won’t lock together side by side.
2. The bottom locking fingers won’t lock into
the previous row.
3. Panels are buckling on the wall
4. Panels are not laying down flat
ITEMS TO CHECK
The wall may not be level and flat. Check previous
panels to ensure that all panels and installation
fingers are properly seated. (Se Basic Guidelines)
Make sure the nails are not restricting panel
movement. Check for proper spacing at side
interlocks. Make sure all fingers are engaged into
previous panel
ATTACHING OBJECTS TO PANELS
Never attach fixtures directly to siding. When attaching fixtures, use a block and follow the fixture
manufacturer’s installation instructions.
WI-QPC-1019REV- Page | 7 of 7 CREEK LEDGESTONE