UTRACK MVT600 User Guide Version 3.0 UTRACK® GPS Vehicle Tracker MVT600 User Guide Copyright © 2013 Extra Miles Solutions Pte Ltd. All rights reserved.
UTRACK MVT600 User Guide Version 3.0 Contents 1. Copyright and Disclaimer ...........................................................................................................................- 3 - 2. Applications................................................................................................................................................. - 3 - 3. Product Function and Specifications ...............................................................................................
UTRACK MVT600 User Guide 1. Version 3.0 Copyright and Disclaimer The user manual may be changed without prior notification. This user manual, or any part thereof, may not be reproduced for any purpose whatsoever without the written authorization of Extra Miles Solutions, or transmitted in any form, either electronically or mechanically, including photocopying and recording.
UTRACK MVT600 User Guide Speeding Alarm Tow Alarm GPS Antenna Cut Alarm External Power Cut Alarm Mileage Report Engine Cut (Engine immobilization) Inbuilt Super Magnet (optional) Handset Phone (optional) Camera (optional) Micro SD Card Memory for Storing Pictures (Optional) RFID Reader (optional) LED Display (optional) LCD Display (optional) 3 Digital Inputs 3 Outputs 3 Analog Input Detection Version 3.0 3.
UTRACK MVT600 User Guide Version 3.0 3 Analog Input Detection 3 Output 4 RS232 Interface 4. MVT600 and Accessories MVT600 with GPS GSM I/O Cable + Battery Antenna Antenna SOS Button USB Data Cable CD Optional Accessories Camera (connect Handset max 2 cameras) Phone 5. RFID Reader A21 LCD Player (dialing, show SMS) View GPS LED GPS Antenna Power, I/O Mic.
UTRACK MVT600 User Guide Version 3.0 6. First Use 6.1 Install SIM Card Check that the SIM has not run out of credit (test the SIM in a phone to make sure it can send and receive SMS); Check that the SIM Lock code is turned off; If you require the function of sending an SMS location report to the authorized phone number when it makes a call to the MVT600, please make sure the SIM installed supports displaying caller ID. Before installing the SIM card, turn off the power for MVT600.
UTRACK MVT600 User Guide Version 3.0 Flashing (0.1 second on and 2.9 seconds off) MVT600 is connected to the GSM network Flashing (1 second on and 2 seconds off) MVT600 is not connected to the GSM network 6.4 Track by Calling Make a call to MVT600 and it will report with one SMS. For example, Now,110727 02:48,V,16,23Km/h,61%,http://maps.google.com/maps?f=q&hl=en&q=22.540103,114.
UTRACK MVT600 User Guide Version 3.0 More SMS commands You can configure MVT600 by mobile phone or by computer using the Parameter Editor. For more details, please refer to part 6.5 Configure by Computer. Note: 1. Password is 4 digits only and defaulted as 0000. You can change the password by Parameter Editor and SMS command. 2. MVT600 will only accept commands from a user with the correct password and report SMS report to the user.
UTRACK MVT600 User Guide Version 3.0 Authorize a phone number to make a silent call to the tracker. The tracker will answer the call automatically and allows the caller to listen to what is happening around the tracker. There is no sound when the tracker is working. Phone Number: 2 monitoring numbers at the most can be set, 16 characters per number. If no preset phone number, it is empty (default). If no phone number, but has “,”, the number related to this “,” is deleted.
UTRACK MVT600 User Guide Version 3.0 Example: 0000,B05,1,22.91319,114.07988,1000,0,1 SMS Get: 353358017784062,B05,OK Once the tracker goes outside of the circle (center: 22.91319,114.07988 and radius 1000 meters), the following message will be received. 353358017784062,ExitGEO,22.918186,114.089823,080229123816,A,10,22,16,32,1,21,6667,850,,0000 6.4.
UTRACK MVT600 User Guide Version 3.0 Run ‘PL2303_Prolific_DriverInstaller’ to install the driver for the USB data cable. Note: PL2303_Prolific_DriverInstaller is in the folder ‘USB-232 Driver ’ in the CD. Connect the USB Data Cable between MVT600 and PC. Open Device Manager (Device Manager is under Control Panel\System and Security\System). You can then find ‘Prolific USB-to-Serial Comm Port’ as the following picture shows. Note: Remember this Com number. It needs to be input into the Parameter Editor.
UTRACK MVT600 User Guide Version 3.0 Choose the correct Com number and terminal type in previous Device Manager then click the ‘Open Port’ button. Click ‘Read Settings’ button to show the default or previous settings of the tracker. Note: Parameter Editor is in the CD. The language will be automatically adjusted to be the same as your PC operation system’s language. Please use “Ctrl+L” to change the language. 6.5.1 SMS Tracking 6.5.1.
UTRACK MVT600 User Guide Version 3.0 = [1,255], it will stop reporting when reaching preset times Read Read current tracker’s settings for above items. Write Write above settings to the tracker. 6.5.1.2 SMS Report Click Tap V: Authorization Item Description Authorization Phone A phone number to receive selected event’s SMS reports. Event Selected event’s SMS reports will be sent to the authorized phone number. For more details, please refer to GPRS/SMS Protocol.
UTRACK MVT600 User Guide Version 3.0 Event Description: Event Description (If the box is ticked, authorized phone number will get event report by SMS or calling) SOS/Input 1 Active Report when input1 (SOS) is active/pressed. Input 2 Active Report when input 2 is active. Input 3 Active Report when input 3 is active. SOS/Input1 Inactive Report when input 1 inactive (SOS released). Input 2 Inactive Report when input 2 inactive. Input 3 Inactive Report when input 3 inactive.
UTRACK MVT600 User Guide Version 3.0 Press Input 3 to call Make a call to authorized phone number when press input 3. Reject Incoming Call Hand up automatically incoming call from correspondent authorized phone number. Call for SMS Location Report Reject incoming call or report SMS location when no answer. Auto Answer Incoming Call Auto answer the incoming call for conversation Listen-in (voice monitoring) Auto answer the incoming call for voice monitoring 6.5.
UTRACK MVT600 User Guide Version 3.0 the times. IP & Port Input server ’s IP address and port number. Secondary IP and Port Input backup server ’s IP address and port number to avoid data losing (Backup Server) when will main receive server is down. The backup server data APN automatically. APN, APN username, APN password: max 32 bytes. APN user name If no username and password required, leave them blank. APN password Tracker ID MVT600’s IMEI. It is the only ID in GPRS packet.
UTRACK MVT600 User Guide Version 3.0 Heartbeat Report Turn on heartbeat report You can define heartbeat interval on tap III Main Settings. Heading Change Report Auto report when MVT600’s direction changes over predefined angle You can define angle degree on tap III Main Settings. Distance Interval Report Track by distance. Interval can be changed on tap III Main Settings. Tow Alarm Alarm when the tracker trembles for a period of time. You can define tow time on tap III Main Settings.
UTRACK MVT600 User Guide Version 3.0 Output low voltage sink current (effective): 500mA max 8 (AD1) Blue 12 Bits Resolution Analog Input1. 0~6V DC Detection. It can be used to connect with temperature/fuel sensor etc. 9 (OUT2) Yellow Output2. It can be used to connect with relay for engine immobilization. Low voltage (0V) when effective and open drain when ineffective. Output open drain sink voltage (ineffective): 45V max. Output low voltage sink current (effective): 500mA max.
UTRACK MVT600 User Guide Version 3.0 7.1.4 Output 7.1.5 Analog Input 7.1.5.1 Analog Input Application 1– Detect External Power Voltage Input range:0-6V Voltage Caculating Formula: input voltage=(AD*3.3*2)/4096 0x0C9B=>3227(decimal)=>(3227*3.3*2)/4096=5.1997V(voltage) 0x0D9D=>3845(decimal)=>(3845*3.3*2)/4096=5.6154V(voltage) 7.1.5.2 Analog Input Application 2 – Fuel Detection (percentage of fuel) Note: Fuel level sensors supplied by us are resistance-type sensors with output resistance: 0-200Ω (ohm).
UTRACK MVT600 User Guide Version 3.0 7.1.6 Install Handset Phone (RS232 Interface) PIN Number Color Description 1 Red Power Output. Output Voltage: 5V 2 Black Ground 3 White Handset Phone RS232 TX (MVT600 RX) 4 Yellow Handset Phone RS232 RX (MVT600 TX) 5 Orange Microphone Positive 6 Grey Microphone Negative 7 Purple Speaker Positive 8 Brown Speaker Negative Note: This interface also supports LCD display; navigator provided conforms to SMS Protocol. 7.1.
UTRACK MVT600 User Guide Version 3.0 GPS RS232 Data Interface PIN Number Color(Suggested) Description 1 Red Power Output. Output Voltage: 5V 2 Black Ground 3 Yellow RS232 Interface TX (MVT600 RX) 4 Green RS232 Interface RX (MVT600 TX) Note: Micro SD is required for taking photos. 7.1.8 Install Micro SD There’s a Micro SD card slot under the On/Off button. Micro SD card can be used to store the pictures taken by the camera. 7.1.
UTRACK MS02 User Guide version 1.3 Connect GPS antenna to the GPS connector which is ‘GPS’ labeled. The optimum location for the GPS antenna is on the roof of the vehicle. The covert and GPS antenna are directional, make sure they are facing up and lying as flat as possible. Secure them in place with glue or zip ties. Note: Do not shield or cover the GPS antenna with any objects containing metal. 7.