User manual

PRODUCT DISPLAY TABLES
38
Chapter 11
LUMINOUS INDICATORS
Signals
Reason Solution
Display
It indicates the Weekly programmer
function.
It is on when the weekly programmer is active.
For all settings relative to the following function see the
“Weekly programmer” function.
It indicates the Room thermostat
function.
It is on/o when the room temperature is below/above the
set threshold.
To modify the temperature threshold, use keys 2 and 3 during
normal functioning.
It indicates the “Day-night temperature
function”
It is on when the “Day-night temperature function” is active.
To enable/disable the “Day-night temperature function” just
press button 4, and holding it down, press button 5. For all
settings relative to the following function, see the Day-night
temperature function paragraph.
It indicates deactivation of the ign-
plug.
It is on when the ign-plug is deactivated.
To restore the functioning of the component, contact an
authorised technician.
It indicates functioning of the fumes
motor.
It is on when the fumes exhaust motor is active.
If it  ashes, contact an authorised technician.
It indicates functioning of the pellet
feed motor.
It is on when the pellet feed motor is active.
During normal functioning the following indicator switches
on  ashing.
It indicates functioning of the
tangential fan.
It is on when the tangential fan is active.
DIVINA PLUS version only
Indicates the motor functioning for
ducting.
It is on when the ducting motor is active.
If  ashing, check the “Mechanical thermostat functioning for
ducting motor control”paragraph.
DIVINA PLUS version only
Indicates the status of an additional
thermostat.
Normally this indicator is ALWAYS on.
When an external thermostat is connected for control of the
ducting motor, the indicator light is on when the external
contact is closed.
It does not indicate any functioning. This indicator must always be o .
It indicates the communication
between remote control and stove.
Every time a key is pressed on the remote control the indicator
must switch on.
If the indicator is always on it indicates that the communication
between remote control and stove is blocked.
To restore the functioning of the component, contact an
authorised technician.